| Easy Way to Solve this Problem is:
1, Load Se tools or Universal or any other S.E Software
2, Connect UBL Testpoint cable to the Phones Battery Pins
(Red Clip to - of Phone : Black Clip to +)
3, Leave the UBL Testpoint cable switched off
4, Connect Cable to bottom of phone
5, Press Info / Read Button on Selected Software
6, Turn On the UBL Testpoint Adapter (Error message should show up)
i.e. S.e Tools Protection Card Error
7, Disconnect the UBL Testpoint Adpater
8, Plug in the Phones Battery and connect the Cable to the bottom of the phone
9, Press Info, Read, Reflash, Flash or any selected button on the Software
Away you go..... 100% Tested on 5 Phones |