GSM-Forum - View Single Post

unitedtelecom · 09-11-2007, 14:09

I connect the phone with cruiser as always I do and I unlock RSA and then direct unlocking but when phone was unlocking it stop itself in middle and didn't complete the process and when I attach the phone again and try to unlock or Flah FS or Main it give me the following massage

System diagnostics passed.
Version 12.02 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49

Sending applet...
Applet ID: 050909 1014 NPACXC1250165_1_SEMC_CO...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Unlock RSA --- ]
Preparing to program flash...
Baudrate = 921600Bd
Programming flash...
Time: 00:00:01
Flash process done.
Phone automatically detached.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49

Sending applet...
Applet ID: 050909 1014 NPACXC1250165_1_SEMC_CO...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Direct Unlock --- ]
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.

No response
This may indicate damaged EROM area!
Try repairing the phone via testpoint method.
If it is an old phone, try converting it to brown first.
No response
This may indicate damaged EROM area!
Try repairing the phone via testpoint method.
If it is an old phone, try converting it to brown first.
No response
This may indicate damaged EROM area!
Try repairing the phone via testpoint method.
If it is an old phone, try converting it to brown first.

Pls help me how I can repair my phone with Testponit and where I can get the picture and how to conntect the testpoint pls Can any one advise me step by step how to fix this phone.
I am sure you guys can hepl me.Pls help me.

Thanks in Advance!

09-11-2007, 14:09	#1 (permalink)
unitedtelecom Freak Poster Join Date: Oct 2005 Location: H.K Posts: 144 Member: 195688 Status: Offline Thanks Meter: 6	K750i dead while unlocking Pls help I connect the phone with cruiser as always I do and I unlock RSA and then direct unlocking but when phone was unlocking it stop itself in middle and didn't complete the process and when I attach the phone again and try to unlock or Flah FS or Main it give me the following massage System diagnostics passed. Version 12.02 ready! [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Booting via ROM... Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2010_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 060206 1814 NPACXC125872_COMPACTPRO... Flash manufacturer: Intel Flash ID: 0x890D OTP Security Level: 1 (Retail) OTP CID: 49 Sending applet... Applet ID: 050909 1014 NPACXC1250165_1_SEMC_CO... RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Unlock RSA --- ] Preparing to program flash... Baudrate = 921600Bd Programming flash... Time: 00:00:01 Flash process done. Phone automatically detached. [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Booting via ROM... Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2010_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 060206 1814 NPACXC125872_COMPACTPRO... Flash manufacturer: Intel Flash ID: 0x890D OTP Security Level: 1 (Retail) OTP CID: 49 Sending applet... Applet ID: 050909 1014 NPACXC1250165_1_SEMC_CO... RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Direct Unlock --- ] Defeating RSA protection... Waiting for the phone to turn off... Should the communication hang, reinsert battery. Baudrate = 460800Bd Sending applet prologue... Sending applet body... Waiting for acknowledge... Defeating RSA protection... Waiting for the phone to turn off... Should the communication hang, reinsert battery. No response This may indicate damaged EROM area! Try repairing the phone via testpoint method. If it is an old phone, try converting it to brown first. No response This may indicate damaged EROM area! Try repairing the phone via testpoint method. If it is an old phone, try converting it to brown first. No response This may indicate damaged EROM area! Try repairing the phone via testpoint method. If it is an old phone, try converting it to brown first. Pls help me how I can repair my phone with Testponit and where I can get the picture and how to conntect the testpoint pls Can any one advise me step by step how to fix this phone. I am sure you guys can hepl me.Pls help me. Thanks in Advance!