Telcel Mexico, can NOT be unlocked with anything.
Use SEARCH on forum for more details.
Quote:
Originally Posted by 001blade Ican`t Unlock 6300b with bb5 Box its this error message
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-217
Version: V_04.70_24-01-07_RM-217_(c)_Nokia.
IMEI: 354827010892675
SP LOCK status:
Config Key: 3340201549764300
Block 1: CLOSED Type 5 Data: 334020
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Skip autobackup of PM 308
Autobackup file:
RM-217_354827010892675_Locked_Keycnt_0_Fbuscnt_0__V_0 4.70_24-01-07_RM-217_(c)_Nokia..bin
already exist
Auto Write PM 308 procedure started
Searching for backup file with lowest FBUS count ...
Finded backup file: RM-217_354827010892675_Locked_Keycnt_0_Fbuscnt_0__V_0 4.70_24-01-07_RM-217_(c)_Nokia..bin
Writting PM Field 308 Subfield 1 with length 8192 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 3340201549764300
Block 1: CLOSED Type 5 Data: 334020
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 07
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 07
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 07
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 07
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 07
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 07
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 07
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 07
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 07
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 07
Unlock fail. Please try again.
after this massage 3 6300 killed with blue light when power on.
Phone starting no more after unlock procedure.
what can make it? |