What EXACTLY was flash chip on this 6125?
Quote:
Originally Posted by sassaki  Not success 6125
------ Operation: UNLOCK Date: 23-10-2007 Time: 14:11:07 -------
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-178
Version: V_04.20_13-11-06_RM-178_(c)_Nokia.
IMEI: 354802012664745
SP LOCK status:
Config Key: 7240600086388183
Block 1: CLOSED Type 5 Data: 72406F
Block 2: CLOSED Type 5 Data: 72410F
Block 3: CLOSED Type 5 Data: 72411F
Block 4: CLOSED Type 5 Data: 21407F
Block 5: CLOSED Type 5 Data: 21402F
Block 6: CLOSED Type 5 Data: 26806F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 10 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Skip autobackup of PM 308
Autobackup file:
RM-178_354802012664745_Locked_Keycnt_0_Fbuscnt_10__V_ 04.20_13-11-06_RM-178_(c)_Nokia..bin
already exist
Auto Write PM 308 procedure started
Searching for backup file with lowest FBUS count ...
Finded backup file: RM-178_354802012664745_Locked_Keycnt_0_Fbuscnt_0__V_0 4.20_13-11-06_RM-178_(c)_Nokia..bin
Writting PM Field 308 Subfield 1 with length 8192 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 7240600086388183
Block 1: CLOSED Type 5 Data: 72406F
Block 2: CLOSED Type 5 Data: 72410F
Block 3: CLOSED Type 5 Data: 72411F
Block 4: CLOSED Type 5 Data: 21407F
Block 5: CLOSED Type 5 Data: 21402F
Block 6: CLOSED Type 5 Data: 26806F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock fail. Please try again. |