| Reset usercode Imobile 510 Show Error But Work. Usercode clear.
See logs. Suggestions Wellcome.
COM4 [VCP0] selected
Device: I-Mobile 510
Checking data, wait...
advanced flash detection active
Action: user code
unlock method: standard
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A02:8A01]...
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
460800
Set baud Done
Identification...
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [standard] (or higher) generation
protocol ver: 04
ver. sw1: ARIMA26_05C_PCB01_GPRS_MT6226_S01.7S-7311-THS0-0-R1N.BIN
ver. sw2: 7S-7311-THS0-0-R1N
ffs offset/size: 00E00000/00200000
warning: invalid identification, ask/rpl calculation reqired
error: rpl file not found: D:\Program Files\InfinityBox\MModule\id.._ARIMA26_05C_PCB01_G PRS_MT6226_S01.7S-7311-THS0-0-R1N.BIN_FFFFFFFF_.rpl
warning: unknown identification structure: ARIMA26_05C_PCB01_GPRS_MT6226_S01.7S-7311-THS0-0-R1N.BIN_FFFFFFFF
error: ASK file can't be created, user action required:
1. download latest software from support area and try again !
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
ARIMA26_05C_PCB01_GPRS_MT6226_S01.7S-7311-THS0-0-R1N.BIN
- make "Read detailed information" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
reading [eeprom[ARIMA26_05C_PCB01_GPRS_MT6226_S01.7S-7311-THS0-0-R1N.BIN]]...
file saved: backup_eeprom[ARIMA26_05C_PCB01_GPRS_MT6226_S01.7S-7311-THS0-0-R1N.BIN]_20071029-120959.B0E.bin
flash: 98004900000002:29EA0000000000
Identification Done
Manipulation...
detection procedure, wait...
detection procedure completed
Manipulation Done
Finalization...
Finalization Done
Write...
flash: 98004900000002:457BB500000000
Write: eeprom
error: error# 000000E4
error: flash write error: 00FF4000:00002000
error: error# 000000E4
error: flash write error: 00FF4000:00002000
error: error# 000000E4
error: flash write error: 00FF4000:00002000
error: error# 000000E4
error: flash write error: 00FF4000:00002000
error: error# 000000E4
error: flash write error: 00FF4000:00002000
error: error# 000000E4
error: flash write error: 00FF4000:00002000
error: error# 000000E4
error: flash write error: 00FF4000:00002000
Write Fail
Finished, time used: 126 sec
Remove/Install battery now ! |