Dear DaWizard,
You have sekected correct COM port so don'rt worry about settings.
Here is detailed instruction how to solve pinout problem:
1. try to swap Rx <-> Tx wires
2. read this:
Due to a lot of different models with
the same name but absolutely different hardware,
bottom connectors and different pinouts we recommend you to include the next info:
1. detailed description of model
2. phone CPU chip name
3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB)
4. attach phone photo
5. attach phone bottom connector photo
6. include
information about Gnd and Charge pins on phone bottom connector
After you
have this information prepared, check the next detailed description how to get pinout for your model:
use "Cable Selector":
http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read:
C:\Program Files\InfinityBox\pinout\ChineseMiracle\
if not helps, please read:
http:///vbb/showpo...36&postcount=7
if not helps, please read:
http:///vbb/showthread.php?t=433447