Quote:
Originally Posted by InfinitySupport  Dear DaWizard,
You have sekected correct COM port so don'rt worry about settings.
Here is detailed instruction how to solve pinout problem:
1. try to swap Rx <-> Tx wires
2. read this:
Due to a lot of different models with the same name but absolutely different hardware,
bottom connectors and different pinouts we recommend you to include the next info:
1. detailed description of model
2. phone CPU chip name
3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB)
4. attach phone photo
5. attach phone bottom connector photo
6. include information about Gnd and Charge pins on phone bottom connector
After you have this information prepared, check the next detailed description how to get pinout for your model:
use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle\
if not helps, please read: http:///vbb/showpo...36&postcount=7
if not helps, please read: http:///vbb/showthread.php?t=433447 |
==== log opened: [11/8/2007 2:49:27 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.64
S/N: 2ED0:0104
error: Dongle firmware[0104] is out of date !
Download latest upgrade-client (DongleManager) from support area
and upgrade dongle firmware.
==== log opened: [11/8/2007 3:00:34 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.64
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
==== log opened: [11/8/2007 4:01:33 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.64
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
COM3 [Winachsf0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
==== log opened: [11/8/2007 5:04:51 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.64
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
COM3 [Winachsf0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
COM3 [Winachsf0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
COM3 [Winachsf0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
COM3 [Winachsf0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
Device: Autodetect 6228 NAND
COM3 [Winachsf0] selected
Device: Autodetect 6228 NAND
Checking data, wait...
Action: read NAND flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
COM3 [Winachsf0] selected
Device: Autodetect 6228 NAND
Checking data, wait...
Action: read NAND flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
COM3 [Winachsf0] selected
Device: Autodetect 6228 NAND
Checking data, wait...
Action: read NAND flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
COM3 [Winachsf0] selected
Device: Autodetect 6228 NAND
Checking data, wait...
Action: read NAND flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
COM3 [Winachsf0] selected
Device: Autodetect 6228 NAND
Checking data, wait...
Action: read NAND flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
Device: Autodetect 6205-6227 NOR
COM3 [Winachsf0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
Action: read NAND flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !
Do you want to continue ?
operation aborted
COM3 [Winachsf0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
==== log opened: [11/9/2007 4:45:40 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.64
S/N: 2ED0:010C
Wait...
==== log opened: [11/9/2007 5:28:27 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.64
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
==== log opened: [11/9/2007 5:29:24 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.64
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 12 sec
Power off phone now !
==== log opened: [11/9/2007 3:16:03 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 12 sec
Power off phone now !
COM3 [Winachsf0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 12 sec
Power off phone now !
==== log opened: [11/9/2007 3:24:49 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 12 sec
Power off phone now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
==== log opened: [11/9/2007 3:25:32 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
==== log opened: [11/10/2007 3:25:38 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
==== log opened: [11/10/2007 3:32:55 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 12 sec
Power off phone now !
Device: Autodetect 6228 NAND
Action: read information
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 12 sec
Power off phone now !
Action: read information
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 11 sec
Power off phone now !
Action: read information
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 12 sec
Power off phone now !
COM12 ready
Action: imei
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 36 sec
Power off phone now !
Action: read information
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 75 sec
Power off phone now !
Device: Autodetect 6205-6227 NOR
COM3 ready
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 12 sec
Power off phone now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 12 sec
Power off phone now !
Action: read codes
unlock method: read codes
Model: Autodetect 6205-6227 NOR
Checking data, wait...
COM3 [Winachsf0] selected
Phone should be Switched OFF !
Press and HOLD Power button now !
9600
error: boot phase#2/1 failed
Can't initialize test mode !
Possible reasons:
1. communication fault, repeat required operation
2. eeprom serious damaged, use repair eeprom files or use other unlock/format method
Operation failed !
Finished, time used: 12 sec
Remove/Install battery now !
COM3 [Winachsf0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
COM3 [Winachsf0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
COM3 [Winachsf0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
COM3 [Winachsf0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
==== log opened: [11/10/2007 3:44:39 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 11 sec
Power off phone now !
Device: Autodetect 6228 NAND
Action: read information
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 12 sec
Power off phone now !
Action: read information
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 12 sec
Power off phone now !
Action: read information
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 11 sec
Power off phone now !
Device: Autodetect 6205-6227 NOR
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 12 sec
Power off phone now !
Device: Autodetect 6228 NAND
==== log opened: [11/10/2007 3:52:05 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 12 sec
Power off phone now !
Device: Autodetect 6228 NAND
COM12 ready
COM12 ready
Action: read information
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 76 sec
Power off phone now !
Device: Autodetect 6205-6227 NOR
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 75 sec
Power off phone now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 15 sec
Power off phone now !
Device: Autodetect 6228 NAND
Action: read information
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 22 sec
Power off phone now !
Action: read information
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 14 sec
Power off phone now !
Action: read information
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 18 sec
Power off phone now !
Device: Autodetect 6205-6227 NOR
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 64 sec
Power off phone now !
==== log opened: [11/11/2007 10:18:51 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
COM12 ready
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 18 sec
Remove/Install battery now !
==== log opened: [11/11/2007 10:29:04 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
==== log opened: [11/11/2007 10:34:11 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 76 sec
Power off phone now !
Device: Autodetect 6228 NAND
Action: read information
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 112 sec
Power off phone now !
Device: Autodetect 6205-6227 NOR
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 19 sec
Power off phone now !
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 207 sec
Remove/Install battery now !
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 79 sec
Power off phone now !
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
Action: read NAND flash
Boot...
Press and HOLD Power button now !
baud autodetection active
error: can't detect device
Release Power button now !
Boot Fail
Finished, time used: 19 sec
Remove/Install battery now !
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 27 sec
Remove/Install battery now !
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 351 sec
Remove/Install battery now !
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 15 sec
Remove/Install battery now !
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 47 sec
Remove/Install battery now !
Loading file v.02...
CM_KTech-N8899_E553_Y7AFTTDBT_E553_GPRS_MT6226_S01.K789+_02 _1_16m_En_Fr_Tr_Ar_Th.B0M.bin loaded
protocol ver: 04
ver. sw1: E553_Y7AFTTDBT_E553_GPRS_MT6226_S01.K789+_02_1.BIN
ver. sw2: K789+.E553_Y7AFTTDBT.02.1
Download manual from support area: Infinity-Box_How_to_repair_dead_Chinese_phone_MT6226_MT6227 _etc_En.htm
Languages: En Fr Th Tr Ar
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 141 sec
Remove/Install battery now !
COM12 ready
COM12 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
error: boot initialization step-3 failed: FF
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 30 sec
Remove/Install battery now !
COM12 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 37 sec
Remove/Install battery now !
Device: Autodetect 6228 NAND
Loading file v.02...
CM_KTech-N8899_E553_Y6ARTF_E553_GPRS_MT6226_S01.01_1_16m_En _Fr_Ru_Th_Ar.B0M.bin loaded
protocol ver: 04
ver. sw1: E553_Y6ARTF_E553_GPRS_MT6226_S01.01_1.BIN
ver. sw2: E553_Y6ARTF.01.1
Download manual from support area: Infinity-Box_How_to_repair_dead_Chinese_phone_MT6226_MT6227 _etc_En.htm
Languages: En Ru Fr Th Ar
COM12 selected
Device: Autodetect 6228 NAND
Checking data, wait...
Action: write NAND flash
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom
warning: incorrect bootloader header
error: unknown source file structure
COM12 selected
Device: Autodetect 6228 NAND
Checking data, wait...
Action: write NAND flash
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom
warning: incorrect bootloader header
error: unknown source file structure
Device: Autodetect 6205-6227 NOR
COM12 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom
error: no data for Firmware
Loading file v.02...
CM_KTech-N8899_E553_Y7AFTTDBT_E553_GPRS_MT6226_S01.K789+_02 _1_16m_En_Fr_Tr_Ar_Th.B0M.bin loaded
protocol ver: 04
ver. sw1: E553_Y7AFTTDBT_E553_GPRS_MT6226_S01.K789+_02_1.BIN
ver. sw2: K789+.E553_Y7AFTTDBT.02.1
Download manual from support area: Infinity-Box_How_to_repair_dead_Chinese_phone_MT6226_MT6227 _etc_En.htm
Languages: En Fr Th Tr Ar
COM12 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
error: boot initialization step-2 failed:
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 326 sec
Remove/Install battery now !
COM3 [Winachsf0] selected
==== log opened: [11/11/2007 11:11:42 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
error: Dongle not connected
==== log opened: [11/11/2007 11:12:10 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
COM12 ready
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 80 sec
Remove/Install battery now !
==== log opened: [11/11/2007 11:19:47 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
error: boot initialization step-2 failed:
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 63 sec
Remove/Install battery now !
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 85 sec
Remove/Install battery now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 79 sec
Power off phone now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 28 sec
Power off phone now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 75 sec
Power off phone now !
Device: Autodetect 6228 NAND
Action: read information
Model: Autodetect 6228 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 76 sec
Power off phone now !
Device: Autodetect 6205-6227 NOR
Device: Autodetect 6228 NAND
COM12 selected
Device: Autodetect 6228 NAND
Checking data, wait...
Action: read NAND flash
Boot...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
Boot Fail
Finished, time used: 697 sec
Remove/Install battery now !
COM12 ready
Device: Autodetect 6205-6227 NOR
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 78 sec
Power off phone now !
==== log opened: [11/11/2007 12:15:35 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 78 sec
Power off phone now !
COM12 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
error: boot initialization step-2 failed:
error: boot initialization step-3 failed:
error: boot initialization step-2 failed:
error: boot initialization step-3 failed:
error: boot initialization step-2 failed:
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 711 sec
Remove/Install battery now !
==== log opened: [11/11/2007 1:44:51 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 52 sec
Power off phone now !
==== log opened: [11/11/2007 1:46:47 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 62 sec
Power off phone now !
==== log opened: [11/11/2007 2:42:43 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 81 sec
Power off phone now !
COM1 ready
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 63 sec
Power off phone now !
==== log opened: [11/11/2007 4:19:00 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 78 sec
Power off phone now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 78 sec
Power off phone now !
==== log opened: [11/12/2007 4:28:17 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
error: connection failed !
Operation failed !
Finished, time used: 76 sec
Power off phone now !
COM1 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 23 sec
Remove/Install battery now !
COM1 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 69 sec
Remove/Install battery now !
COM1 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 38 sec
Remove/Install battery now !
COM1 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 58 sec
Remove/Install battery now !
==== log opened: [11/12/2007 4:37:36 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.65
S/N: 2ED0:010C
Wait...
Device: Autodetect 6205-6227 NOR
Done
COM1 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 97 sec
Remove/Install battery now !
COM1 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.0CBB62C9.[SZMI26_05C_SET_PCB01_GPRS_MT6226_S01.V2_0628_0_0_1 .BIN_E7AD9F52].rpl
identification detection finished
device-id: 0CBB62C9
protocol ver: 04
ver. sw1: SZMI26_05C_SET_PCB01_GPRS_MT6226_S01.V2_0628_0_0_1 .BIN
ver. sw2: V2.0628.0.0.1
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [flash[SZMI26_05C_SET_PCB01_GPRS_MT6226_S01.V2_0628_0_0_1 .BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\Save\N73 Music Ed\backup_flash[SZMI26_05C_SET_PCB01_GPRS_MT6226_S01.V2_0628_0_0_1 .BIN]_20071112-171015.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\Save\N73 Music Ed\backup_system_log_0CBB62C9_SZMI26_05C_SET_PCB01 _GPRS_MT6226_S01.V2_0628_0_0_1.BIN_E7AD9F52_200711 12-171105.B0X.bin
Finished, time used: 1845 sec
Remove/Install battery now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: Nokia N73(11)
Software version: V2.0628.0.0.1"
Software date: 2005.04.12
Barcode: 0615016537 10
imei: 135790246811220
Finished, time used: 19 sec
Power off phone now !
COM1 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.0CBB62C9.[SZMI26_05C_SET_PCB01_GPRS_MT6226_S01.V2_0628_0_0_1 .BIN_E7AD9F52].rpl
identification detection finished
device-id: 0CBB62C9
protocol ver: 04
ver. sw1: SZMI26_05C_SET_PCB01_GPRS_MT6226_S01.V2_0628_0_0_1 .BIN
ver. sw2: V2.0628.0.0.1
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
detection phase #3...
.................................................. ..............
done
detecting structure pass 1...
...................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
.................................................. .....
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
eeprom element #1 detected ok
file saved: C:\Program Files\InfinityBox\ChineseMiracle\Save\N73 Music Ed\backup_system_log_0CBB62C9_SZMI26_05C_SET_PCB01 _GPRS_MT6226_S01.V2_0628_0_0_1.BIN_E7AD9F52_200711 12-171504.B0X.bin
Finished, time used: 126 sec
Remove/Install battery now !
Loading file v.02...
CM_Nokia-N73-Music-Edition_SZMI26_05C_SET_PCB01_GPRS_MT6226_S01.V2_06 28_0_0_1_16m_Ru_Fr_En_Th_Vn_Cn_Hi_Cn_Ar.B0M.bin loaded
protocol ver: 04
ver. sw1: SZMI26_05C_SET_PCB01_GPRS_MT6226_S01.V2_0628_0_0_1 .BIN
ver. sw2: V2.0628.0.0.1
Languages: En Ru Fr Th Vn Cn Ar
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !
Do you want to continue ?
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
COM1 selected
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
Connecting, wait...
warning: wrong packet cs
warning: wrong packet cs
warning: wrong packet cs
error: can't finalize test moide
Operation failed !
Finished, time used: 20 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !
Do you want to continue ?
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
COM1 selected
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
Connecting, wait...
warning: wrong packet cs
warning: wrong packet cs
warning: wrong packet cs
warning: wrong packet cs
error: can't finalize test moide
Operation failed !
Finished, time used: 20 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !
Do you want to continue ?
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
COM1 selected
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
Connecting, wait...
warning: wrong packet cs
warning: wrong packet cs
warning: wrong packet cs
error: can't finalize test moide
Operation failed !
Finished, time used: 19 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !
Do you want to continue ?
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
COM1 selected
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: V2.0628.0.0.1
Version: NokiaN73(11)
detecting structure #2...
done
imei: 13579024681122
connection Ok
building list...
done
items to clear: 227
163 of 227 items cleared
0 items remains
Finished, time used: 413 sec
Remove/Install battery now !
At last for a very long time i have succesfully create my own cable and succesfully flash the n73 china mobile..it's worth trying ....
Thanks Infinity for your support hope you release a new updates this coming months..Congratulations to my self for a job well done!!!!!!!!!!
BR,
DaWizard