| Connecting to BB5 Box ...
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-227
Version: V_1.0615.31_12-02-07_RM-227_(c)_Nokia.
IMEI: 3518790120xxxxx
SP LOCK status:
Config Key: 2190100000000000
Block 1: CLOSED Type 5 Data: 21901F
Block 2: CLOSED Type 5 Data: 21901F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Skip autobackup of PM 308
Autobackup file:
RM-227_3518790120xxxxx_Locked_Keycnt_0_Fbuscnt_0__V_1 .0615.31_12-02-07_RM-227_(c)_Nokia..bin
already exist
Auto Write PM 308 procedure started
Searching for backup file with lowest FBUS count ...
Finded backup file: RM-227_3518790120xxxxx_Locked_Keycnt_0_Fbuscnt_0__V_1 .0615.31_12-02-07_RM-227_(c)_Nokia..bin
Writting PM Field 308 Subfield 1 with length 8192 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 2190100000000000
Block 1: CLOSED Type 5 Data: 21901F
Block 2: CLOSED Type 5 Data: 21901F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 00
Reading again SP Locks ...
SP LOCK status:
Config Key: 2190100000000000
Block 1: OPEN Type 5 Data: 21901F
Block 2: OPEN Type 5 Data: 21901F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Phone unlocked succesfull
Testpoints are the same as E61. I had to take off sim card reader, 2 capacitors and cut a small part of metal housing so I can connect testpoints. |