DST11 write ok .
file saved: C:\Documents and Settings\Halil ibrahim\Desktop\backup_eeprom_20071211-104458.B0E.bin
flash: 01227E22202200:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 Ok
security area backup saved: id.68CD4015.[MTK26_05C_X11B_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_ 16.BIN_C8860F77].rpl
identification#1 detection finished
device-id: 68CD4015
identification#1 protocol ver: 04
ver. sw1: MTK26_05C_X11B_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_ 16.BIN
ver. sw2: MAUI.05C.W06.16
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
security area#1 calculation
file saved: backup_system_log_68CD4015_MTK26_05C_X11B_PCB01_GP RS_MT6226_S01.MAUI_05C_W06_16.BIN_C8860F77_2007121 1-104555.B0X.bin
Area: Firmware
flash: 01227E22202200:29EA0000000000
Write: Firmware
Write Done
file saved: backup_system_log_68CD4015_MTK26_05C_X11B_PCB01_GP RS_MT6226_S01.MAUI_05C_W06_16.BIN_C8860F77_2007121 1-111057.B0X.bin
Finished, time used: 1782 sec
Remove/Install battery now !
But i cant find anyway to second pinouts
