[telkomb2]

Hi

I have one 6500 dead after full flash.
I flashed it on two diffrent version of MT.
First ver. 1.38B and mobile was full flashed but still dead and info from MT file:

Selected Highest installed version: 03.21
VPP is DISABLED.
Processing File: rm265__03.21_ISM_006.image_b
Force CP Convert to 128K PSize!!!
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo_xsr15.fg
Erase RAP3 [01EC0000 - 03F9FFFF]
Erase RAP3 [01BC0000 - 01EBFFFF]
Erase[35.88 MB]...
Waiting response for 320 Sec...in 13.70s
Flash[38.62 MB]...in 3.20s
* * Processed file in 25.03 seconds
Extract content...fail
Processing File: rm265__03.21.ppm_b
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [01540000 - 01BBFFFF]
Erase[6.50 MB]...
Waiting response for 320 Sec...in 15.22s
Flash[4.87 MB]...in 180.00s
* * Processed file in 203.05 seconds
* * * Phone flashing done in 5: 3 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
Phone not responding, try to set manually!
VPP is DISABLED.



and after flashing ver.1.43 fro example and other like 1.37, 1.42 mobile was flashed only MCU but CNT show info:
VPP is DISABLED.
Processing File: rm265__03.21_ISM_006.image_b
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo_xsr15.fg
Erase RAP3 [01EC0000 - 03F9FFFF]
Erase RAP3 [01BC0000 - 01EBFFFF]
Erase[35.88 MB]...
Waiting response for 320 Sec...in 13.67s
Flash[38.62 MB]...
%%%%%%%% ERROR SENDING FLASH:
Failed at address 0115C000
Warnign log file is more then 1MB
Scanning files, please wait...
Done

but mobile alive and show only first picture "Start Up phone without...." and nothing. I pressed button and no reaction.

What is wrong?

Cable, MT program ?/

Thanks for help