| Repaired one Chinese 6500 which was restarting.Formatting didn't help so I flashed phone with
CM_Nokia-N6500_MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MAUI_ 05C_W06_16_16m_En_Ru_Fr_Es_Th_Vn_Pt_Ar.B0M
Here is the log
COM4 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:58C6:C5CB
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.E188537E.[MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MAUI_05C_W0 6_16.BIN_EA09F55F].rpl
identification#1 detection finished
device-id: E188537E
identification#1 protocol ver: 04
ver. sw1: MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MAUI_05C_W0 6_16.BIN
ver. sw2: MAUI.05C.W06.16
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting languages...
language parameters detected
detected languages: En Ru Fr Es Th Vn Pt Ar
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
security area#1 calculation...
done
file saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _E188537E_MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.M AUI_05C_W06_16.BIN_EA09F55F_20080111-224314.B0X.bin
Area: Firmware
flash: 01227E22202200:29EA0000000000
Write: Firmware
Write Done
file saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _E188537E_MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.M AUI_05C_W06_16.BIN_EA09F55F_20080111-225056.B0X.bin
Finished, time used: 523 sec
Remove/Install battery now ! |