GSM-Forum - View Single Post - HERE is new version of EF51 to be supported

tsarkh · 02-06-2008, 11:50

HERE is new version of EF51 to be supported

and here is link for read full flash and eprom of this phone:

http://rapidshare.com/files/89587200...rabic.rar.html

as infinity can read but can not write or unlock this phone at all and i try many speeds and protocol and many things with no success at all every time give me the same error when try to write or unlock:

COM3 [VCP0] selected
Device: BenQ EF51
Checking data, wait...
Action: flash write
"smart write" active
Write: Firmware
Skip: Flex
Write: Language Pack
Skip: Eeprom
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
Set Baud Done
Check Flash...
Check Flash Done
Check Parameters...
Check Parameters Done
Check Space...
Flash: 001C:00C8001C00C8
flash: Mitsubishi B 8Mb
Check Space Done
Check Data...
Check Data Done
Erasing...
erase operation not required
Erasing Done
Writing...
Write: Firmware
Flash: 001C:00C8001C00C8
flash: Mitsubishi B 8Mb
error: answer#00
try#1 to recover erase error#00
error: answer#00
try#2 to recover erase error#00
error: answer#00
try#3 to recover erase error#00
Writing Fail
Finished, time used: 75 sec
Remove/Install battery now !

02-06-2008, 11:50	#1 (permalink)
tsarkh No Life Poster Join Date: Jul 2005 Location: France Age: 48 Posts: 6,857 Member: 165812 Status: Offline Sonork: 100:1627635 Thanks Meter: 4,267	HERE is new version of EF51 to be supported HERE is new version of EF51 to be supported and here is link for read full flash and eprom of this phone: http://rapidshare.com/files/89587200...rabic.rar.html as infinity can read but can not write or unlock this phone at all and i try many speeds and protocol and many things with no success at all every time give me the same error when try to write or unlock: COM3 [VCP0] selected Device: BenQ EF51 Checking data, wait... Action: flash write "smart write" active Write: Firmware Skip: Flex Write: Language Pack Skip: Eeprom Boot... Phone should be Switched OFF ! Press Power button now ! Connecting... Boot Done Check Connection... Check Connection Done Set Baud... Set Baud Done Check Flash... Check Flash Done Check Parameters... Check Parameters Done Check Space... Flash: 001C:00C8001C00C8 flash: Mitsubishi B 8Mb Check Space Done Check Data... Check Data Done Erasing... erase operation not required Erasing Done Writing... Write: Firmware Flash: 001C:00C8001C00C8 flash: Mitsubishi B 8Mb error: answer#00 try#1 to recover erase error#00 error: answer#00 try#2 to recover erase error#00 error: answer#00 try#3 to recover erase error#00 Writing Fail Finished, time used: 75 sec Remove/Install battery now !