HERE IS A LOG OF MBM S96 WITH INFINITY:
COM1 [Serial0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:349D:369C
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000001:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000001:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 98004900000001:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000001:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.83339648.[M678_PCB01_GPRS_MT6226_S01.K008-***_26BV01_01B02.BIN_DABDCC62].rpl
====================
New firmware detected:
M678_PCB01_GPRS_MT6226_S01.K008-***_26BV01_01B02.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support:
[email protected]
- send flash backup file(s) to support:
[email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 83339648
identification#1 protocol ver: 04
ver. sw1: M678_PCB01_GPRS_MT6226_S01.K008-***_26BV01_01B02.BIN
ver. sw2: K008-***_26Bv01.01b02, 9D334225
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 98004900000001:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [flash[M678_PCB01_GPRS_MT6226_S01.K008-***_26BV01_01B02.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\system_log_E44158 0C_CKT26_06B_PCB01_GPRS_MT6226_S01.DINOSAUR6_26B_Y U_L7EN_202_071224_LD_OV0_SS75_CTF_BT_06B.BIN_1B23B 23A_20080612-170046.B0X.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\system_log_833396 48_M678_PCB01_GPRS_MT6226_S01.K008-***_26BV01_01B02.BIN_DABDCC62_20080621-230110.B0X.bin
Finished, time used: 1631 sec
Remove/Install battery now !
FLASH BACKUP , PINOUTS IMAGES , CPU TYPE ALL DETAILS SEND TO INFINITY SUPPORT. HOPE THIS WILL BE ADDED SOON.