| Really pinout is not same.
Tested v-power pinout can be used in both boxes in some gf760 versions.
Tested infinity pinout can be used in both boxes in some gf760 versions.
But has some versions that just infinity pinout and Hmmodule 1.21 can boot....after unlock infinity says: phone unlocked ok but phone still locked....after tryes
no sucess ....did i full flash back-up and flash phone with infinity support area files.
Result= PHONE DEAD
Infinity cant write back-up in phone, what i do?? i need to send backup to infinity support??
Here my first log after change cable to infinity pinout.
Loading data, wait...
[Infinity Box] v1.21
Current model: Gradiente-GF760
COM4 [VCP0] selected
Device: Gradiente-GF760
Action: unlock
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
boot version: 00020602
connecting...
Boot done
Check connection...
Check connection done
Set baud...
812500
Set baud done
Check hardware...
flash: 01227E223C2200:8AEA0000000000
flash: Amd PL256N D 16Mb
Check hardware done
Read data...
reading Gradiente-GF760_eeprom_calibration-1...
file saved: C:\Arquivos de programas\InfinityBox\HModule\backup_Gradiente-GF760_eeprom_calibration-1_20080705-132042.92E.bin
reading Gradiente-GF760_eeprom_calibration-2...
file saved: C:\Arquivos de programas\InfinityBox\HModule\backup_Gradiente-GF760_eeprom_calibration-2_20080705-132503.92E.bin
Read data done
Check data...
file saved: C:\Arquivos de programas\InfinityBox\HModule\backup_eeprom_200807 05-132915.92E.bin
please, wait...
pass-1...
pass-2...
pass-3...
pass-4...
pass-5...
pass-6...
pass-7...
pass-8...
Check data done
Writing...
flash: 01227E223C2200:46237300000000
Write: eeprom
Writing done
Finished, time used: 635 sec |