GSM-Forum - View Single Post

KUBAT1 · 08-09-2008, 14:08

I get a new type of 5310, RX/TX connection from USB connector I have found.. but when try to read flash I get booting error..what to do? I am usin Chines Miracle v2.54.

COM4 [VCP1] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot disabled
chip: 0001:FF0F:FFFF
high speed disabled
boot step size: 0400
error: bootcode start error: A4 not authorized: 000000A4
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 14 sec
Remove/Install battery now !

08-09-2008, 14:08	#1 (permalink)
KUBAT1 Registered User Join Date: Feb 2004 Location: MERSIN, TURKEY Posts: 1,260 Member: 55026 Status: Offline Thanks Meter: 53	5310 Boot Problem!! I get a new type of 5310, RX/TX connection from USB connector I have found.. but when try to read flash I get booting error..what to do? I am usin Chines Miracle v2.54. COM4 [VCP1] selected Device: Autodetect 6205-6227 NOR Checking data, wait... advanced flash detection enabled Action: read NOR flash Boot... Press and HOLD Power button now ! baud autodetection active 19200 autodetect Connecting, wait... Initializing[6225:8A03:8A00]... CPU: MT6225 high speed boot disabled chip: 0001:FF0F:FFFF high speed disabled boot step size: 0400 error: bootcode start error: A4 not authorized: 000000A4 Release Power button now ! in case of initial connection problem: on/off "Boot baudrate autoselect" box. Boot Fail Finished, time used: 14 sec Remove/Install battery now !