Quote:
Originally Posted by InfinityHelp  hello!
please make complete format |
COM31 [VCP4] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:A39A:91E9
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:35386600000000
flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:35386600000000
flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
total flash region size: 02000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.3B47E681.[SZMI26_05C_PCB01_GPRS_MT6226_S01.S660_X6201B_SET_S P254J_V2_1.BIN_18CC6E4B].rpl
====================
New firmware detected:
SZMI26_05C_PCB01_GPRS_MT6226_S01.S660_X6201B_SET_S P254J_V2_1.BIN
- make "Read full flash" operation
- send "backup_system_log_..." file to support:
[email protected]
- send flash backup file(s) to support:
[email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 3B47E681
identification#1 protocol ver: 04
ver. sw1: SZMI26_05C_PCB01_GPRS_MT6226_S01.S660_X6201B_SET_S P254J_V2_1.BIN
ver. sw2: S660_X6201B_SET_SP254J_V2.1, B49133E7
ffs offset/size: 01E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 2 chip(s)...
standard eeprom/ffs offset detected: 01E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
flash: 01227E22202200:35386600000000
checking area[01000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 01E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 01
eeprom/ffs area: 01000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[SZMI26_05C_PCB01_GPRS_MT6226_S01.S660_X6201B_SET_S P254J_V2_1.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[SZMI26_05C_PCB01_GPRS_MT6226_S01.S660_X6201B_SET_S P254J_V2_1.BIN]_20080813-141504.B0E.bin
flash: 01227E22202200:29EA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 01227E22202200:35386600000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\system_log_3B47E6 81_SZMI26_05C_PCB01_GPRS_MT6226_S01.S660_X6201B_SE T_SP254J_V2_1.BIN_18CC6E4B_20080813-141528.B0X.bin
Finished, time used: 381 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !