| thank you infinity team
succussful unlock fly sl 500i
COM12 [VCP1] selected
Device: Fly SL500i
Checking data, wait...
advanced flash detection active
Action: unlock
unlock method: standard
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6219:8B02:8B01]...
MT6226MA detected
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89881500010001:89881500000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [standard] (or higher) generation
protocol ver: 04
ver. sw1: SL900A_UKFLY_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06 _08_MP_V72_F2.BIN
ver. sw2: SL900A.05C.W06.08.MP.V72.F2
ffs offset/size: 00E00000/00200000
warning: invalid identification, ask/rpl calculation reqired
error: rpl file not found: C:\Program Files\InfinityBox\MModule\id.._SL900A_UKFLY_PCB01_ GPRS_MT6226M_S01.SL900A_05C_W06_08_MP_V72_F2.BIN_F FFFFFFF_.rpl
warning: unknown identification structure: SL900A_UKFLY_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06 _08_MP_V72_F2.BIN_FFFFFFFF
error: ASK file can't be created, user action required:
1. download latest software from support area and try again !
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
SL900A_UKFLY_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06 _08_MP_V72_F2.BIN
- make "Read detailed information" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
reading [eeprom[SL900A_UKFLY_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06 _08_MP_V72_F2.BIN]]...
file saved: backup_eeprom[SL900A_UKFLY_PCB01_GPRS_MT6226M_S01.SL900A_05C_W06 _08_MP_V72_F2.BIN]_20080823-082256.B0E.bin
flash: 89881500010001:89881500000000
Identification Done
Manipulation...
detection procedure, wait...
detection procedure completed
Manipulation Done
Finalization...
.................................
flash: 89881500010001:89881500000000
flash: 89881500010001:89881500000000
Write: area 0/1
...............................
Finalization Done
Write...
flash: 89881500010001:89881500000000
Write: eeprom
Write Done
Finished, time used: 407 sec
Remove/Install battery now ! |