View Single Post
Old 09-19-2008, 12:13   #1 (permalink)
yhob
Insane Poster
 
Join Date: Jan 2007
Location: philipines
Posts: 91
Member: 437258
Status: Offline
Thanks Meter: 23
myphone S21 unlock in test mmodule 2.32 not done

logs:unlock method: smart fast

COM1 [Serial0] selected
Action: unlock
unlock method: smart fast
Model: MyPhone-S21
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6223:8A04]...
CPU: MT6223
chip: 0011:0A9C:000C
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E04
Date: 2000.00.00
Version: 1.0
Version: T01_23.07A.W0736.MP.FMCAM-FTP_V0.07
Version: Tinno23_07A_HW
44 byte(s) read
imei: 354391017.....
connection Ok
157 byte(s) read
reading data...
building new data...
writing data...
145 byte(s) read
reading data...
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 11 sec
Remove/Install battery now !


logs:unlock method: standard


COM30 [VCP0] selected
Device: MyPhone-S21
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: "sp-unlock"
unlock method: standard
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6223:8A04]...
CPU: MT6223
chip: 0011:0A9C:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.732A7 69B.[TINNO23_07A_PCB01_GPRS_MT6223_S00.T01_23_07A_W0736 _MP_FMCAM-FTP_V0_07.BIN_85FEEF84].rpl
identification#1 detection finished
device-id: 732A769B
identification#1 protocol ver: 04
ver. sw1: TINNO23_07A_PCB01_GPRS_MT6223_S00.T01_23_07A_W0736 _MP_FMCAM-FTP_V0_07.BIN
ver. sw2: T01_23.07A.W0736.MP.FMCAM-FTP_V0.07, 7B10017A
ffs offset/size: 00800000/00800000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[TINNO23_07A_PCB01_GPRS_MT6223_S00.T01_23_07A_W0736 _MP_FMCAM-FTP_V0_07.BIN]...
file saved: C:\Program Files\InfinityBox\MModule\eeprom[TINNO23_07A_PCB01_GPRS_MT6223_S00.T01_23_07A_W0736 _MP_FMCAM-FTP_V0_07.BIN]_20080919-180849.B0E.bin
flash: 01227E22202200:2AEA0000000000
Backup required data Done
Patch required data...
detection procedure, wait...
detection procedure completed
detection procedure, wait...
detection procedure completed
Patch required data Done
Special operation...
error: probably unknown firmware version, read flash and send to support: [email protected]
Special operation Done
Write...
flash: 01227E22202200:2AEA0000000000
Write: eeprom
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_732A769B_TINNO23_07A_PCB01_GPRS_MT6223_S00.T01_ 23_07A_W0736_MP_FMCAM-FTP_V0_07.BIN_85FEEF84_20080919-181242.B0X.bin
Finished, time used: 1111 sec
Remove/Install battery now !
  Reply With Quote
 
Page generated in 0.11107 seconds with 7 queries