NEW FIRMWARE ON SIMOCO SM 498,
HEAR IS LOG :-
COM5 [VCP1] selected
module v2.40
Device: Simoco-SM498
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
chip: 0001:B203:0002
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.931F3 B30.[SCUD25_06B_PCB01_GPRS_MT6225_S00.619_V11.BIN_8DF5F D47].rpl
New firmware detected (2.40) :
SCUD25_06B_PCB01_GPRS_MT6225_S00.619_V11.BIN
- make "Read full flash" operation
- send "system_log_..." file to support:
[email protected]
- send flash backup file(s) to support:
[email protected]
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 931F3B30
identification#1 protocol ver: 04
ver. sw 1: SCUD25_06B_PCB01_GPRS_MT6225_S00.619_V11.BIN
ver. sw 2: 619.V11, B8020A72
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
sim-lock status: unknown
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: flash[SCUD25_06B_PCB01_GPRS_MT6225_S00.619_V11.BIN]_part_1_of_1...
file saved: C:\Program Files\InfinityBox\MModule\flash[SCUD25_06B_PCB01_GPRS_MT6225_S00.619_V11.BIN]_part_1_of_1_20081113-174148.B0X.bin
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og_931F3B30_SCUD25_06B_PCB01_GPRS_MT6225_S00.619_V 11.BIN_8DF5FD47_20081113-174200.B0X.bin
Finished, time used: 685 sec
Remove/Install battery now !
PL ADD THIS MODEL IN M MODULE, AND PROVIDED THIS FILE ON SUPPORT AREA. HEAR IS FILE LINK:- http://rapidshare.com/files/16335223...174148.B0X.rar