GSM-Forum - View Single Post - k800i testpoint embedded flashloader not responds

Andriey · 02-10-2009, 00:21

v0.915032/UNI
CARD SERIAL: 0008XXXX
Loaded 51 flash descriptors
TESTPOINT REPAIR STAGE #1 STARTED
PROCEDURE WAS STOPPED BY USER
Elapsed: 3 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 31 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
PROCEDURE WAS STOPPED BY USER
Trying to launch embedded bootloader...
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 195 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 3 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded bootloader not responds !
Elapsed: 301 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 13 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 2 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
PROCEDURE WAS STOPPED BY USER
Trying to launch embedded bootloader...
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 5 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:115200
Elapsed: 6 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:115200
ATTACH TP #2 AND PRESS "READY"
PROCEDURE WAS STOPPED BY USER
Trying to launch embedded bootloader...
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 32 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:115200
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
PROCEDURE WAS STOPPED BY USER
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 67 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:115200
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
PROCEDURE WAS STOPPED BY USER
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 83 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:115200
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
PROCEDURE WAS STOPPED BY USER
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 55 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 6 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded bootloader not responds !
Elapsed: 45 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 6 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 1 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded flashloader not responds !
Elapsed: 111 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 8 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
PROCEDURE WAS STOPPED BY USER
embedded flashloader not responds !
Elapsed: 208 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 1 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded bootloader not responds !
Elapsed: 42 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded bootloader not responds !
Elapsed: 40 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 11 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
PROCEDURE WAS STOPPED BY USER
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 37 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
PROCEDURE WAS STOPPED BY USER
embedded flashloader not responds !
Elapsed: 76 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
PROCEDURE WAS STOPPED BY USER
embedded flashloader not responds !
Elapsed: 46 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded bootloader not responds !
Elapsed: 32 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
embedded flashloader not responds !
Elapsed: 86 secs.

still the same prob...
i dont have any ideas...
maybe this is HW problem??
i dont know...

02-10-2009, 00:21	#7 (permalink)
Andriey Freak Poster Join Date: Jan 2009 Posts: 219 Member: 952457 Status: Offline Sonork: 1000.9080 Thanks Meter: 34	v0.915032/UNI CARD SERIAL: 0008XXXX Loaded 51 flash descriptors TESTPOINT REPAIR STAGE #1 STARTED PROCEDURE WAS STOPPED BY USER Elapsed: 3 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 31 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" PROCEDURE WAS STOPPED BY USER Trying to launch embedded bootloader... TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 195 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 3 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded bootloader not responds ! Elapsed: 301 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 13 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 2 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" PROCEDURE WAS STOPPED BY USER Trying to launch embedded bootloader... TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 5 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:115200 Elapsed: 6 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:115200 ATTACH TP #2 AND PRESS "READY" PROCEDURE WAS STOPPED BY USER Trying to launch embedded bootloader... TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 32 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:115200 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... PROCEDURE WAS STOPPED BY USER TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 67 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:115200 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... PROCEDURE WAS STOPPED BY USER TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 83 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:115200 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... PROCEDURE WAS STOPPED BY USER TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 55 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 6 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded bootloader not responds ! Elapsed: 45 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 6 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 1 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded flashloader not responds ! Elapsed: 111 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 8 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" PROCEDURE WAS STOPPED BY USER embedded flashloader not responds ! Elapsed: 208 secs. TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 1 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded bootloader not responds ! Elapsed: 42 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded bootloader not responds ! Elapsed: 40 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 Elapsed: 11 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... PROCEDURE WAS STOPPED BY USER TP #2 INCORRECT OR STAGE #1 NOT EXECUTED Elapsed: 37 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" PROCEDURE WAS STOPPED BY USER embedded flashloader not responds ! Elapsed: 76 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" PROCEDURE WAS STOPPED BY USER embedded flashloader not responds ! Elapsed: 46 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded bootloader not responds ! Elapsed: 32 secs. TESTPOINT REPAIR STAGE #2 STARTED Open COM port OK ChipID:9900,EMP protocol:0301 Speed:921600 ATTACH TP #2 AND PRESS "READY" Trying to launch embedded bootloader... TP #2 LOOKS OKAY RELEASE TP #2 AND PRESS "READY" embedded flashloader not responds ! Elapsed: 86 secs. still the same prob... i dont have any ideas... maybe this is HW problem?? i dont know...