GSM-Forum - View Single Post - LG ke970 SHINE flash without restart problem

bootgsm · 04-19-2009, 09:22

testerday i had a ke970 restart when power on i serched on this section but i didn't found the solution. now problem sloved so i want to share the solution may be help other members.

1 full charge the battery before flashing phone
2 i choose thoes files
- KE970P40-AFR-V10i-000-00_JUL-30-2007_firmware.B1M
- KE970P40-AFR-V10i-000-00_JUL-30-2007_file_system.B1S
- KE970_repair_eeprom_complete_10.B1E
3 choose reset setting
4 write

languages on this flash are 20: (english,français,deutsch,italiano,portugues,espan ol,turkish,dansk,nederlands,suomi,magyar,norsk,pol ski,roman...)
here's the log:
COM4 [VCP0] selected
module v1.60
Device: LG-KE970
Checking data, wait...
Action: flash write
Boot ...
Press and HOLD Power button now !
loading...
next part...
boot answer: 02
Release Power button now
Boot Done
Set Baud ...
460800
Set Baud Done
Connecting ...
flash: 0089:887E
Connecting Done
Check hardware ...
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
backup critical area Done
Check memory ...
Check memory Done
Write ...
reset...
done
Writing: Firmware
Verifying...
Done
Writing: FFS-2/File system
Verifying...
Done
Writing: Eeprom
Verifying...
Done
Write Done
Finished, time used: 3480 sec
Remove/Install battery now !

04-19-2009, 09:22	#1 (permalink)
bootgsm No Life Poster Join Date: Jun 2007 Location: colmar Posts: 637 Member: 527800 Status: Offline Thanks Meter: 234	LG ke970 SHINE flash without restart problem testerday i had a ke970 restart when power on i serched on this section but i didn't found the solution. now problem sloved so i want to share the solution may be help other members. 1 full charge the battery before flashing phone 2 i choose thoes files - KE970P40-AFR-V10i-000-00_JUL-30-2007_firmware.B1M - KE970P40-AFR-V10i-000-00_JUL-30-2007_file_system.B1S - KE970_repair_eeprom_complete_10.B1E 3 choose reset setting 4 write languages on this flash are 20: (english,français,deutsch,italiano,portugues,espan ol,turkish,dansk,nederlands,suomi,magyar,norsk,pol ski,roman...) here's the log: COM4 [VCP0] selected module v1.60 Device: LG-KE970 Checking data, wait... Action: flash write Boot ... Press and HOLD Power button now ! loading... next part... boot answer: 02 Release Power button now Boot Done Set Baud ... 460800 Set Baud Done Connecting ... flash: 0089:887E Connecting Done Check hardware ... Check hardware Done Check parameters ... Check parameters Done backup critical area ... backup critical area Done Check memory ... Check memory Done Write ... reset... done Writing: Firmware Verifying... Done Writing: FFS-2/File system Verifying... Done Writing: Eeprom Verifying... Done Write Done Finished, time used: 3480 sec Remove/Install battery now !