GSM-Forum - View Single Post - Touchscreen Bypass damaged calibration solution 100% work for me!!!

kalpeshoza · 04-21-2009, 14:15

COM4 [VCP1] selected
module v2.80
Action: touchscreen calibration
mode: 3
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8E03:0001
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: MAUI.06B.W07.24
Version: 6225_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-3)...
warning: wrong packet cs
done
162 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Finished, time used: 15 sec
Remove/Install battery now !

04-21-2009, 14:15	#7 (permalink)
kalpeshoza No Life Poster Join Date: Mar 2007 Location: Buy Buy Thank U GsmHostig .... Age: 41 Posts: 1,701 Member: 462292 Status: Offline Thanks Meter: 397	Again working on sigmatel v88 COM4 [VCP1] selected module v2.80 Action: touchscreen calibration mode: 3 Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6225:8A03:8A00]... CPU: MT6225 high speed boot On chip: 0001:8E03:0001 status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6225,E03 Date: 2006.06.14 Version: 1.0 Version: MAUI.06B.W07.24 Version: 6225_06B_HW detecting structure #2... 0 done 44 byte(s) read imei: 13579024681122 warning: current phone imei is incorrect ! It's need to repair imei for correct phone functionality ! connection Ok detecting structure #5 (mode-3)... warning: wrong packet cs done 162 byte(s) read reading data #2... writing data... verification... verification Ok Finished, time used: 15 sec Remove/Install battery now !