 [Tips] What you should know about mobileEx - MXKEY in practice
Here i will explain in step to save your time and optimize the job when using mobileEx, specially with 'Nokia Tool'.
- Always select correct 'Generation' first before any operation.
- Always Use "Scan" if you're working with non dead phone, this will help mobileEx to use 'correct' spesific setting for any phones attached to box.
- Make sure phone is in correct mode for any FBUS/NON flashing operation,
example: in Tuning & Testing page phone should be in TEST MODE, else will be best if the phone is in LOCAL MODE.Do phone mode change manually if needed.
- For any operation, specially newly released phones, its better to save its security data (RPL + full pm) first before you do anything else.
- if you noticed, there was a differences of flashing speed between FlashID/Manufacturer
the option 'Fast flash' should not be enabled for flash chip "INTEL"
- if you need only to change the language, select file setting as NORMAL. then check 'Language Only" should do the job
- "Safe Flash" will save RPL backup from flash mode(even a DEAD one except ASIC11 phones).
- Use "Restart" button every time you need to refresh the connection or restart the phone.
- Use "..."(Read Phone Mode) button at the right of the phone mode combo to check if the phone if connected and synchronized.
- mobileEx loads your selected "Products" folder to the phone model list, so make sure you have set the correct folder ("Options").
- to be continued. |