dear infinity team i have china nktel a200 model phone with dull disply mean disply is poor and its 100% software prob. i flash it with same phones flash file but that time result is white disply what can i do there is not suppoorded flash file in support area.
phones orignal flash file-KCM25_GEMINI_PCB01_GPRS_MT6225_S00.K7_PBLCD_GC0316 _T19_V2_0.BIN
i flash with this file-flash[N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_2ADGB_ S5LCD_V1_2_9.BIN]_20090412-004314.B0M
here is orignal phone in fomation---number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.78, database date: 04.03.2009):
KCM25_GEMINI_PCB01_GPRS_MT6225_S00.K7_PBLCD_GC0316 _T19_V2_0.BIN
This firmware is missing in support area. If this phone is good and working:
- make "Read full flash" operation
- send flash backup files to support:
[email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: KCM25_GEMINI_PCB01_GPRS_MT6225_S00.K7_PBLCD_GC0316 _T19_V2_0.BIN
ver. sw 2: k7_PbLCD_GC0316_T19_V2.0, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98000300000000:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detecting ffs/eeprom structure pass 1...
......................
detect standard fat location pass #1...
..................................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs/eeprom detected ok: element #1
detecting ffs/eeprom structure pass 2...
......................
detect standard fat location pass #1...
..................................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs/eeprom detected ok element #2
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Finished, time used: 64 sec
Remove/Install battery now !
plz guide me or suggest perfect flash file.
thanks.