[rajufzr]

sir problem is in software. checked sealed brand new set for flasing and set died with same problem means no hardware fault but new 3110c not supported. please check it again as problem tested with new set with same results.even with mtbox mt log attached ;
Phone is in: Local mode
Model: RM-237 ( 3110 CLASSIS CABLE 6300)
V 07.21/05-11-08/RM-237 (c) Nokia.
Production serial number MKO311117
Product code 0581523
Module code 0203291
Basic production code 0542523
Flash code
Order number
Long production SN
MCU SW V 07.21/05-11-08/RM-237/(c) Nokia.
HW 5008
PCI
RFIC 17211721
DSP ICPR61_08w10
PPM V 07.21/05-11-08/RM-237/(c) Nokia. /MR
Retu 32
Tahvo 53
Content Pack Content: ctv_india_mr/V 07.21/13-01-09/RM-237/(c) Nokia. //
IMEI: 354206030656990
Boot...
Using Tx2 Data line.
Trying boot BB5 phone...

rap3gv3_2nd.fg
RAP3Gv3_algo.fg
BOOT OK...
CMT Certificates
NPC 0x0200
CCC 0x0200
HWC 0x0100
APE Certificates
============= Set FBus mode for SIMLOCK backup =============
VBat is 3.93V

Vpp pin has 1.30V, Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Test mode
Model: RM-237 ( 3110 CLASSIS CABLE 6300)
V 07.21/05-11-08/RM-237 (c) Nokia.
IMEI: 354206030656990
BB5 PM back Phone is in: Test mode
IMEI: 354206030656990
Backup RF Settings:
Section 1: , 00[72], 02[62], 04[6E], 06[62], 08[6E], 0D[62], 10[56], 12[56], 14[56], 19[4], 1D[6], 22[50]
Section 2: , 00[1B0]
Backup Product Versions:
Section 4: , 00[1], 01[40], 03[A], 04[8], 05[8], 06[8], 09[5], 12[50], 13[4]
Section 7:
Backup SIMLOCK:
Section 78:
Section 134: , 00[1], 01[2000], 03[1], 04[1], 05[A], 06[1], 07[1], 08[1], 09[28]
Backup ENERGY:
Section 135: , 00[4], 01[2], 02[C], 04[C], 05[C], 07[C], 08[C], 11[C], 16[C]
Section 142: , 00[1]
Section C1: , 02[8], 03[20], 04[20], 09[40]
SIMLOCK Backup file:
C:\Program Files\GriffinTeam\MT-Box\rpls\354206030656990.rpl.pm
Using Tx2 Data line.
Processing File: rm237__07.21.mcusw
Boot...
FAILED TO BOOT PHONE!!!
Make sure that phone is connected.
Using Tx2 Data line.
BB5 PM back Phone is in: Test mode
IMEI: 354206030656990
Backup file: C:\Program Files\GriffinTeam\MT-Box\bb5bckup\RM-237_354206030656990.pm
Processing File: rm237__07.21.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
CMT Certificates
NPC 0x0200
HWC 0x0100
CCC 0x0200
C:\Program Files\GriffinTeam\MT-Box\rpls\354206030656990_0.rpl
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 0001FFFF]
Erase RAP3 [00020000 - 0007FFFF]
Erase RAP3 [00080000 - 000DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase RAP3 [00200000 - 0031FFFF]
Erase RAP3 [00320000 - 0105FFFF]
Erase RAP3 [01060000 - 01067FFF]
Erase RAP3 [01068000 - 0107FFFF]
Erase[16.38 MB]...
Waiting response for 320 Sec...in 90.17s
Flash[14.47 MB]...
Data Error!!
Check TX2 line!

%%%%%%%% ERROR SENDING FLASH:
Failed at address 00000000
Phone not powered
============= Set Flash mode for info =============
Boot...
Using Tx2 Data line.
Trying boot BB5 phone...

rap3gv3_2nd.fg
RAP3Gv3_algo.fg
BOOT OK...
Phone Type: BB5
------------------- SYSTEM ID Response: 7 blocks -------------
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006010C192101001101
EM_ASIC_ID( RAP ):
00000232
EM_ASIC_ID( RAP ):
00000353
PUBLIC_ID( RAP ):
13E00018AE737E569B9590E2CCDBC2F6ED34C7B9
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
BAF3A9C3DBFA8454937DB77F2B8852B1
ROM_ID( RAP ):
191EC665DFAAF68F
--------------- Device ID Response: 3 blocks -------------
Storage Device:
Owner Asic: RAP
Type: NOR Flash
Index: 0
Flash: Intel, 0089 8981 0000 0000
Storage Device Contents:
Owner Asic: RAP
0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
============= Set FBus mode for info =============
VBat is 3.93V

Vpp pin has 0.08V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0