[vmin81]

i have been flashed nokia N86 8MP successfully via DEAD USB from version ((10)) to ((11)) :

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7828
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.05, (Jun 22 2009 12:23:29, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: CONST-TX2-PIN ; VISTA-SUPPORT ; BB5-NCK-CALC
Box Serial Number: C0000415
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk27
Initializing security card...
Card Serial Number: D1000120
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage	5.09v	PASSED
MCU Voltage	3.28v	PASSED
Core Voltage	1.78v	PASSED
VBAT Voltage	0.01v	PASSED
VBAT Voltage	5.01v	PASSED
Box VPP disabled
VPP Voltage	0.04v	PASSED
Internal Box VPP Enabled
VPP Voltage	4.88v	PASSED
Box VPP disabled
VPP Voltage	0.04v	PASSED
External Box VPP Enabled
VPP Voltage	0.00v	FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Read RPL operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
[BB5 BootRom]: Found 1 active devices
[Nokia USB Flashing Generic]: Opening Connection
[Nokia USB Flashing Generic]: Port opened OK!
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID:		 00000296
CMT_EM_ASIC_ID:		 00000B22
CMT_PUBLIC_ID:		 177001040D7B0052825ADDA15FF7CCB9205F9032
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 479C6DDE3942E12C429C1D6ADED80371
CMT_ROM_ID:		 4B9B75103E691FF8
DeadUSB.raw, Type: 2nd Boot Loader, Rev: , Algo: BB5
Sending RAW Loader...
DeadUSB.alg, Type: Algorithm, Rev: , Algo: XSR 1.6
Sending CMT RAW Algorithm...
Waiting for ADL Server Startup...
[BB5 ADL Server]: Found 1 active devices
[Nokia BB5 ADL Loader USB Generic]: Opening Connection
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
ADL Server Startup Confirmed OK!
Processing RM-484_11.043_prd.core.fpsx (CMT)...
RM-484_11.043_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Partitioning...
Partitioning OK
Started flash erase
EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
EraseArea[0,CMT]: 0x00083400-0x003FFFFF, ONENAND
EraseArea[0,CMT]: 0x00800000-0x00D5FFFF, ONENAND
EraseArea[0,CMT]: 0x00D60000-0x0A27FFFF, ONENAND
Erase Partition (CMT)
Erase taken 0.922s
Writing all blocks...
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 39.516s
Processing RM-484_11.043_008_prd.language.fpsx (CMT)...
RM-484_11.043_008_prd.language.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x07A20000-0x0957FFFF, ONENAND
Erase taken 0.172s
Writing all blocks...
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 5.31s
Processing RM-484_11.043_54.1_prd.customer.fpsx (CMT)...
RM-484_11.043_54.1_prd.customer.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x09580000-0x0A27FFFF, ONENAND
Erase taken 0.93s
Writing all blocks...
Writing CMT SOS+ROFS3 Certificate...
Programming Status OK!
All blocks written OK! Time taken 0.78s
Processing RM-484_11.043_003_U001.uda.fpsx (CMT)...
RM-484_11.043_003_U001.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Started flash erase
EraseArea[0,CMT]: 0x0A280000-0x0F47FFFF, ONENAND
Erase taken 0.63s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 7.516s
Restarting CMT...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Factory defaults OK
Reading info...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished !