View Single Post
Old 07-08-2009, 05:24   #1 (permalink)
R@ZIB-BD
No Life Poster
 
R@ZIB-BD's Avatar
 
Join Date: Mar 2008
Location: China/USA
Posts: 2,717
Member: 718425
Status: Offline
Thanks Meter: 5,873
Can't Remove touchscreen calibration

I am Fulsh SpiderMan Box IEMI Cheance
I am Allrady Work By InfinityBox touchscreen Repiar


Mode : 1


COM18 [VCP1] selected
module v2.84
Action: touchscreen calibration
mode: 2
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:E303:000D
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: R229A_HED_V00.03_20081113
Version: PHONE25_GEMINI_HW
detecting structure #2...
5 11 done
67 byte(s) read
imei: 35044801123456
connection Ok
detecting structure #5 (mode-2)...
0warning: wrong packet cs
1warning: wrong packet cs
2 3 done
210 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Power-On and test phone now
If calibration is not completed yet:
1. make "Reverse calibration order" Checked and try again
2. try another calibration mode
Finished, time used: 11 sec
Remove/Install battery now !




Mode : 2



COM18 [VCP1] selected
module v2.84
Action: touchscreen calibration
mode: 3
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:E303:000D
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: R229A_HED_V00.03_20081113
Version: PHONE25_GEMINI_HW
detecting structure #2...
5 11 done
67 byte(s) read
imei: 35044801123456
connection Ok
detecting structure #5 (mode-3)...
0 1 2 3 6 done
212 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Power-On and test phone now
If calibration is not completed yet:
1. make "Reverse calibration order" Checked and try again
2. try another calibration mode
Finished, time used: 14 sec
Remove/Install battery now !

What can i do
  Reply With Quote
 
Page generated in 0.07385 seconds with 7 queries