GSM-Forum - View Single Post

kansoie · 10-15-2009, 03:10

heres another one,maybe its not hardware failure.

unit: DX777 mickey mouse

history phone locked code to remove only.

different baudrate combinations done!

ALWAYS WRONG PACKET CS error???

Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: HEXING26_08B_GEMINI_HW
Software version: B024-1B_L26_V204"
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 353186022472757
imei: 353186022472757
Finished, time used: 5 sec
Power off phone now !

COM1 [Serial0] selected
module v2.84
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read/check detailed information
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:B388:3D26
status: FF
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #02 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #03 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
error: can't work at this speed, use lower speed
Set baud Fail
Finished, time used: 43 sec
Remove/Install battery now !
================================================== ========

FORMATTING COMPLETE MODE

COM4 [VCP0] selected
module v2.84
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:B388:3D26
status: FF
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #02 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #03 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.84, database date: 08.07.2009):
HEXING26_08B_GEMINI_PCB01_GPRS_MT6226_S01.B024-1B_L26_V204.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 05
ver. sw 1: HEXING26_08B_GEMINI_PCB01_GPRS_MT6226_S01.B024-1B_L26_V204.BIN
ver. sw 2: B024-1B_L26_V204, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 2088C4FFFFFFFF:2088C400000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: HEXING26_08B_GEMINI_PCB01_GPRS_MT6226_S01.B024-1B_L26_V204__ffs...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\HEXING26_08B_GEMI NI_PCB01_GPRS_MT6226_S01.B024-1B_L26_V204__ffs_20091012-134830.B0E.bin
flash: 2088C4FFFFFFFF:2088C400000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 2088C4FFFFFFFF:2088C400000000
Finalization Done
Finished, time used: 300 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

================================================== ======================

COM4 [VCP0] selected
module v2.84
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:B388:3D26
status: FF
Connecting at 19200, wait...
warning: wrong packet cs
Release Power button now !
Phone detected, wait...
warning: wrong packet cs
warning: wrong packet cs
warning: wrong packet cs
warning: wrong packet cs
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs
19 20 21 22 23 24 25 26 27warning: wrong packet cs
28 29error: detection failed (30 tries), read flash and send to support
warning: wrong packet cs
connection lost
error: operation failed !
Finished, time used: 10 sec
Remove/Install battery now !

==================================================

OM4 [VCP1] selected
module v2.84
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:B388:3D26
status: FF
Connecting at 19200, wait...
warning: wrong packet cs
Release Power button now !
Phone detected, wait...
warning: wrong packet cs
warning: wrong packet cs
warning: wrong packet cs
warning: wrong packet cs
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs
19 20 21 22 23 24 25 26 27warning: wrong packet cs
28 29error: detection failed (30 tries), read flash and send to support
warning: wrong packet cs
connection lost
error: operation failed !
Finished, time used: 10 sec
Remove/Install battery now !

updated :

COM4 [VCP1] selected
module v2.93
Action: touchscreen calibration
How to calibrate touchscreen:
- for this operation you need to have full flash backup from phone
- if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
- if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

Do you have full flash backup ?
Loading file v.02...
HEXING26_08B_GEMINI_PCB01_GPRS_MT6226_S01.B024-1B_L26_V204__fullflash_20091012-124133.B0M.bin loaded
error: unknown ffs structure
error: can't detect eeprom structure id
error: operation failed !
Finished, time used: 12 sec
Remove/Install battery now !

back up fullflash

http://rapidshare.com/files/29192043...wares.rar.html

please pm me,thanks.

10-15-2009, 03:10	#11 (permalink)
kansoie Insane Poster Join Date: Sep 2006 Location: philippines Posts: 97 Member: 353512 Status: Offline Thanks Meter: 15	heres another one,maybe its not hardware failure. unit: DX777 mickey mouse history phone locked code to remove only. different baudrate combinations done! ALWAYS WRONG PACKET CS error??? Action: read information Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... Hardware version: MT6226, E02 Hardware version: HEXING26_08B_GEMINI_HW Software version: B024-1B_L26_V204" Software date: 2005.04.12 Barcode: MT012345678901234567 imei: 353186022472757 imei: 353186022472757 Finished, time used: 5 sec Power off phone now ! COM1 [Serial0] selected module v2.84 Device: Autodetect 6205-6227 NOR Checking data, wait... advanced flash detection enabled Action: read/check detailed information Boot ... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing [6226:8A02:8A01]... CPU: MT6226 high speed boot Off chip: 0031:B388:3D26 status: FF high speed boot Off boot packet size: 0002 Release Power button now ! Boot Done Initialize ... detecting chip #00 in region #00... flash: 2088C4FFFFFFFF:2088C400000000 flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb detecting chip #01 in region #00... flash: 2088C4FFFFFFFF:2088C400000000 flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb detecting chip #02 in region #00... flash: 2088C4FFFFFFFF:2088C400000000 flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb detecting chip #03 in region #00... flash: 2088C4FFFFFFFF:2088C400000000 flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb number of flash chip/regions detected: 04/01 Initialize Done Set baud ... 921600 error: can't work at this speed, use lower speed Set baud Fail Finished, time used: 43 sec Remove/Install battery now ! ================================================== ======== FORMATTING COMPLETE MODE COM4 [VCP0] selected module v2.84 Device: Autodetect 6205-6227 NOR Checking data, wait... advanced flash detection enabled Action: "format ffs" ffs/eeprom backup enabled, it may takes several minutes ! Boot ... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing [6226:8A02:8A01]... CPU: MT6226 high speed boot Off chip: 0031:B388:3D26 status: FF high speed boot Off boot packet size: 0002 Release Power button now ! Boot Done Initialize ... detecting chip #00 in region #00... flash: 2088C4FFFFFFFF:2088C400000000 flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb detecting chip #01 in region #00... flash: 2088C4FFFFFFFF:2088C400000000 flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb detecting chip #02 in region #00... flash: 2088C4FFFFFFFF:2088C400000000 flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb detecting chip #03 in region #00... flash: 2088C4FFFFFFFF:2088C400000000 flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb number of flash chip/regions detected: 04/01 Initialize Done Set baud ... 921600 Set baud Done Initialize bootcode ... Initialize bootcode Done Check firmware integrity ... device parameters autodetection in progress... detecting chip #00 in region #00... flash: 2088C4FFFFFFFF:2088C400000000 flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb detecting chip #01 in region #00... flash: 2088C4FFFFFFFF:2088C400000000 flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5 number of flash chip/regions detected: 01/01 total flash region size: 01000000 detect device identification#1... detection phase #1... detect device identification#1 finished identification#1 structure: 2nd [standard] generation ==================== New firmware detected (v.2.84, database date: 08.07.2009): HEXING26_08B_GEMINI_PCB01_GPRS_MT6226_S01.B024-1B_L26_V204.BIN This firmware is missing in support area. If this phone is good and working: - make "Read full flash" operation - send flash backup files to support: [email protected] - include in your e-mail full text from phone back label (phone name etc.) ==================== identification#1 detection finished identification#1 protocol ver: 05 ver. sw 1: HEXING26_08B_GEMINI_PCB01_GPRS_MT6226_S01.B024-1B_L26_V204.BIN ver. sw 2: B024-1B_L26_V204, 00000000 ffs offset/size: 00E00000/00200000 detect device identification#2... detection phase #1... . detect device identification#2 finished detecting ffs/eeprom area in 1 chip(s)... standard ffs/eeprom offset detected: 00E00000 flash: 2088C4FFFFFFFF:2088C400000000 checking area [00000000]: 00000000-00FFFFFF... ffs/eeprom found near: 00E00000 detecting ffs/eeprom size... ffs/eeprom size: 00200000 ffs/eeprom chip: 00 ffs/eeprom area: 00000000:00E00000-00FFFFFF Check firmware integrity Done Check firmware content ... Check firmware content Done Backup required data ... reading: HEXING26_08B_GEMINI_PCB01_GPRS_MT6226_S01.B024-1B_L26_V204__ffs... file saved: C:\Program Files\InfinityBox\ChineseMiracle\HEXING26_08B_GEMI NI_PCB01_GPRS_MT6226_S01.B024-1B_L26_V204__ffs_20091012-134830.B0E.bin flash: 2088C4FFFFFFFF:2088C400000000 Backup required data Done Patch required data ... Patch required data Done Special operation ... Special operation Done Write ... Write Done Finalization ... formatting... flash: 2088C4FFFFFFFF:2088C400000000 Finalization Done Finished, time used: 300 sec Remove/Install battery now ! File system has been modified ! It is need to press and HOLD phone "Power" button during long time (up to 1 min) to make phone Powered-On ! ================================================== ====================== COM4 [VCP0] selected module v2.84 Action: touchscreen calibration mode: 1 Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6226:8A02:8A01]... CPU: MT6226 high speed boot Off chip: 0031:B388:3D26 status: FF Connecting at 19200, wait... warning: wrong packet cs Release Power button now ! Phone detected, wait... warning: wrong packet cs warning: wrong packet cs warning: wrong packet cs warning: wrong packet cs warning: can't read software version, probably unknown firmware detecting structure #2... 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs 19 20 21 22 23 24 25 26 27warning: wrong packet cs 28 29error: detection failed (30 tries), read flash and send to support warning: wrong packet cs connection lost error: operation failed ! Finished, time used: 10 sec Remove/Install battery now ! ================================================== OM4 [VCP1] selected module v2.84 Action: reset settings Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6226:8A02:8A01]... CPU: MT6226 high speed boot Off chip: 0031:B388:3D26 status: FF Connecting at 19200, wait... warning: wrong packet cs Release Power button now ! Phone detected, wait... warning: wrong packet cs warning: wrong packet cs warning: wrong packet cs warning: wrong packet cs warning: can't read software version, probably unknown firmware detecting structure #2... 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs 19 20 21 22 23 24 25 26 27warning: wrong packet cs 28 29error: detection failed (30 tries), read flash and send to support warning: wrong packet cs connection lost error: operation failed ! Finished, time used: 10 sec Remove/Install battery now ! updated : COM4 [VCP1] selected module v2.93 Action: touchscreen calibration How to calibrate touchscreen: - for this operation you need to have full flash backup from phone - if you have full flash backup already press "Yes", select full flash file and follow instructions given by software - if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure Do you have full flash backup ? Loading file v.02... HEXING26_08B_GEMINI_PCB01_GPRS_MT6226_S01.B024-1B_L26_V204__fullflash_20091012-124133.B0M.bin loaded error: unknown ffs structure error: can't detect eeprom structure id error: operation failed ! Finished, time used: 12 sec Remove/Install battery now ! back up fullflash http://rapidshare.com/files/29192043...wares.rar.html please pm me,thanks.