Case : Nokia N70 ... No signal.. searching manual no operator Found
SUmmary : RX Problem
Next step : Make self test by UFS
Summary from this self test.. Problem at RF Bus Problem
Next Step :
Check RF Bus Way from Rap to Hinku at :
J7504= Data
J7505= Clock
J7506= Enable
i found that J7506 is bad test point.. so Enable from Rap is not connect to Hinku and Vinku
Next step.... make jumper from line of Rap M8 to Hinku at K7
After make jumper... i make selft test again....
result :
all self test is OK
result :
Case Done!!