[milkyctg]

Before flashing it was working ok. For change language I attemped to flash it. But flashing job doesn't complete. Hwk gives me the following error....here is the logs...

With MCU- M620XEHF1_FULL.s3t.....

1st Boot Ok, McuId: 00030021, Rom: 00030021, 13-1.2 (Vision X122A)
2nd Boot Ok, McuId: 00030021, Rom: 00030021, 7-2.0
Fll Boot Ok, Vers: 5.22, fl_sceptreeg_vx100_eval_v24_s05_2.sre
Flash1: Fl_Id: 00010000_227E3D00 - Spansion SxxWS512P
Baud Rate Set: 460800 bps
Flashing NOR part...
ErTxdt: 0 - eom.OPEN+!eom.

Write Failed at: 0x209C4000
--------------------------------------------------------------------------

With MCM620XFIE1_binary.s3 and CTS-M620XFIE1_CTS.cts....

Region: 1, 0x20000000-0x20000063, Length: 100 bytes
Region: 2, 0x2000C000-0x20011113, Length: 20756 bytes
Region: 3, 0x20016000-0x200173BF, Length: 5056 bytes
Region: 4, 0x2001E000-0x2001E09F, Length: 160 bytes
Region: 5, 0x2003803C-0x20040F87, Length: 36684 bytes
Region: 6, 0x20058000-0x20058037, Length: 56 bytes
Region: 7, 0x20058138-0x2005C665, Length: 17710 bytes
Region: 8, 0x20078000-0x20183C9B, Length: 1096860 bytes
Region: 9, 0x20300000-0x21CA7677, Length: 26900088 bytes
1st Boot Ok, McuId: 00030021, Rom: 00030021, 13-1.2 (Vision X122A)
2nd Boot Ok, McuId: 00030021, Rom: 00030021, 7-2.0
Fll Boot Ok, Vers: 5.22, fl_sceptreeg_vx100_eval_v24_s05_2.sre
Flash1: Fl_Id: 00010000_227E3D00 - Spansion SxxWS512P
Baud Rate Set: 460800 bps
Flashing NOR part...
ErTxdt: 0 - eom.OPEN+!eom.

Write Failed at: 0x20704000

Would anybody pls help me.
Thanx in advance.