NEW PHONE
FORTUNE F16 PL ADD THIS,
I READ FULL FLASH IN PANA01 MODULE & UPLOAD, SET IS FULL OK.
HEARE IS PIN CONNECTION:-
Code:
software version: 1.20
cable type: 1x18 (L18A)
platform: PMB: Infineon e-gold
searching adapter at COM6...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
e-gold: A0
result: Rx:11 Tx:12
time required: 49 sec
Trying to Power-On...
Power On !
saved: FORTUNE_F16
LOG:-
Code:
COM6 [VCP0] selected
module v1.69
Device: Huawei-T128-HW-A
Checking data, wait...
Action: read flash
Boot ...
Press and HOLD Power button now !
e-gold: A0
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
460800
Set Baud Done
Connecting ...
flash: 0001:011A
Connecting Done
Check hardware ...
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: C:\Program Files\InfinityBox\Pana01\Huawei-T128-HW-A_eeprom-static_20091212-180848.B1E.bin
loading data...
wrong database file: C:\Program Files\InfinityBox\Pana01\T128_eep65535.cfg
error: can't load database v.65535
reading eeprom-security...
file saved: C:\Program Files\InfinityBox\Pana01\Huawei-T128-HW-A_eeprom-security_20091212-180848.B1E.bin
reading eeprom-complete...
file saved: C:\Program Files\InfinityBox\Pana01\Huawei-T128-HW-A_eeprom-complete_20091212-180852.B1E.bin
backup critical area Done
Check memory ...
reading flash...
file saved: C:\Program Files\InfinityBox\Pana01\Huawei-T128-HW-A_flash_20091212-181056.B1X FORTUNE F16
completed
Finished, time used: 188 sec
Remove/Install battery now !
HEARE IS UPLOADED LINK:-