Quote:
Originally Posted by InfinitySupport  Hello,
This phone can not be killed permanently, you can repair this kind of phones with Infinity-Box even in case of empty-board phone.
You need to double check battery voltage and flash phone with latest firmware from support area.
Also you can check what was original phone firmware version (see operation.log file in folder with module) and flash phone with the same firmware that was in phone before. |
COM3 [VCP1] selected
module v3.01
Device: ZTE-X761
Checking data, wait...
advanced flash detection enabled
Action: write flash
"format ffs" active
write: Firmware
ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00[1].X761_Z2_SF_BFFA103_En_Fr_Es_Vodafone-Indie.B0M.bin
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
ZTE-X761_ffs_04[1].X761_Z2_SF_BFFA108.B0E.bin
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:9703:000A
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 01227E22312200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x008000 007Ex020000 0004x008000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.4B358 AE5.[ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA1 03.BIN_020FBE36].rpl
rom info detection finished
device-id: 4B358AE5
rom info ver: 04
sw version: ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA1 03.BIN
project-id: X761_Z2_SF_BFFA103, 36BE0F02
code offset: 00000000
ffs offset/size [01]: 00E00000/00200000
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
ffs/eeprom address assigned: 00E00000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
reading: ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_ BFFA103__ffs...
file saved: C:\Program Files\InfinityBox\MModule\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_ BFFA103__ffs_20100118-205412.B0E.bin
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
usb bootloader (file) is absent
startup code area #1 check...
startup code area #1 calculation...
startup code area #1 fixed
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_ BFFA103__system_log_4B358AE5_020FBE36_20100118-205447.B0X.bin
Area: Firmware
flash: 01227E22312200:18E59F00000000
Write: Firmware
Area: Eeprom/ffs
flash: 01227E22312200:18E59F00000000
Write: Eeprom/ffs
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
Write Done
====> Finalization ...
ffs formatting...
flash: 01227E22312200:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_ BFFA103__system_log_4B358AE5_020FBE36_20100118-210743.B0X.bin
Finished, time used: 15 min 57 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !