[gsm junction]

phone must will be on , then connect mini usb to phone and install driver.then open (Dloader lite)
and select com.and tick to backup/nv restore.then select flash file.and hit to Start.
NOTE:-dont write backup/nv

after complete flashing , open battery an put it again and power on the phone. your phone
screen will shows white screen.
open haier unlocker.(austin cell).and select com port and hit to austin cell.now ur phone will
be restart and shows complete screen.

then use this code:-*32#00# and select min lock off.

now ready to use all UIM card




DEAD FLASHING DETAILS :



1. connect hand set > give driver path
2. check comport in device manager > open dloaderlite .exe> load desired cxxx file
now follow 8 to 11 steps.

if handset fails to ask driver or blinking haier cxxx follow 3 to 11 steps.

3. press CALL+END button and don't release till handset ask for driver
4. connect usb cable
5. check device manager for the created comport
6. open c2000 DLoaderLite.exe,choose download option,
tick mark on dload offline
7. choose the desired model file cxxx
8. press start wait > now software says >fails
9. open dloaderlite.exe.ini> go to 8 line fail port and edit
failport to the created one by the handset [FailPort=x]
now close the .ini and save changes.
10.open DLoaderLite.exe chek on Dloadoffline click on start
wait for the software to complete operation
if white screen appers >
11. Now restore nv data