| Some Basic Info:
1. It is suggested that you extract everything on the ROOT C:\ of your hardware under "AdvanceBox" folder.
2. The exe will scan flash files from both drive C: and drive D:
3. AUTO RPL Backup during flashing may not work most of the time. Manually Backup your RPL by going to the
"IMEI and Locks" tab and then click "IMEI" on the right side.
4. SL3 phones are still detected as SL2... But of course, they will not be unlocked.
5. If flashing fails, you can lower the flashing speed. If you are 100% sure your cable is good, you may choose
15 Mhz flashing.
6. Unlocking and SD Repair are both Server Based.
7. Scan phone will automatically detect the correct flash files depending on the product codes installed.
For suggestions about software interface functionalities to make your repair jobs easier, please
suggest here on this thread and we will implement it if feasible.
Basic Info About Slow NOR Phones...
ATF Can ONLY Guarantee similar Speeds with FLS-5, FPS-10 or FPS-21 if you will be using
a VPP enabled Cable for flashing Slow NOR flash based phones like 3110c, 7210, 6300 with ATD flash etc...
For Rapido, RAPUYAMA and RAP3Gv4 phones, most of them don't need VPP cables at all and
the flash speed will be very very fast.
So try to test with NAND phones and compare with other boxes.
NOR Phones are also fast,, but most people have problems with cables not having RX2 Pins or
VPP Pins. Nokeeya put those pins for a reason... |