please I need this firmware B9000c+
log details:
Scan Results:
CPU: MT6235.
VCC:5,GND:4 7,RXD:10,TXD:9,BOOT:8
[V:5 G:4 7 8 R:10 T:9] Apply to Box
Connected to Phone.
CPU: 6235 Ver: 0001 SW:8A01
CPU ID: 00000300
Initialize Boot...
Nand Flash Type: [TOSHIBA] TC58NVG0S3AFT
Nand Flash Code: 009800D1(00900015)
Nand Flash Size: 0x08400000 Hex Bytes
INT/EXT RAM Size: 0x00010000+0x00000000
The File Information:
NEOTEL35_08B_GEMINI_PCB01_GPRS_MT6235B_S01.B300_DH D_EN1_TY1G_JST_Y_V005.BIN
the file not be encrypted(Not turnon)
Anylisising UnLock Code,Hit [STOP] to exit
>>>>
phone condition before only the message can not be opened
I've beckup fw and successful, I flash back all done. but the phone, still dead.
This log when flashing:
Connected to Phone.
CPU: 6235 Ver: 0001 SW:8A01
CPU ID: 00000300
Initialize Boot...
Nand Flash Type: [TOSHIBA] TC58NVG0S3AFT
Nand Flash Code: 009800D1(00900015)
Nand Flash Size: 0x08400000 Hex Bytes
INT/EXT RAM Size: 0x00010000+0x00000000
Nand Data 0
Verifying Baud...
Set Baud:921600 OK.
>>>new method<<<
Writing(Nand)...
Write OK.
if Not pwr on, Please Format it
>>total£º 7 mins22 s |