GSM-Forum - View Single Post - E2100 HANG on LOGO then RESTART DONE by the POWER of Z3X

Ligalig · 03-12-2010, 10:37

PROBLEM:

* (HANG ON LOGO THEN RESTAT)

GADGET/TOOLS:

* Z3X SAMSUNG ACTIVATED
* J750 rj45 CABLE

=download this firmware to support "E2100DXID3" (NOT AVAILABLE) try other version.. after reflash goes to DEAD.

PROCEDURE:

* use this version and tested many times here. "NO NEED TO ERASE" download it from support v(E2100XEIH1)

* upload it and tick write FIRMWARE

problem:

logs of flashing/screenshot

Code:

Selected model: E2100
Selected com port: COM3
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 08
Sending loader2... OK
NAND format - îê
Start NOR flash
NOR flash - ok
Start Flash TFS
Download - ok
Elapsed time: 614 second, sw ver: 3.4.0033

wella. working na..

03-12-2010, 10:37	#1 (permalink)
Ligalig No Life Poster Join Date: Jul 2009 Location: Manila Posts: 1,306 Member: 1079935 Status: Offline Thanks Meter: 511	E2100 HANG on LOGO then RESTART DONE by the POWER of Z3X PROBLEM: * (HANG ON LOGO THEN RESTAT) GADGET/TOOLS: * Z3X SAMSUNG ACTIVATED * J750 rj45 CABLE =download this firmware to support "E2100DXID3" (NOT AVAILABLE) try other version.. after reflash goes to DEAD. PROCEDURE: * use this version and tested many times here. "NO NEED TO ERASE" download it from support v(E2100XEIH1) * upload it and tick write FIRMWARE problem: *logs of flashing/screenshot* Code: Selected model: E2100 Selected com port: COM3 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Sending loader1... OK Flash ID: 08 Sending loader2... OK NAND format - îê Start NOR flash NOR flash - ok Start Flash TFS Download - ok Elapsed time: 614 second, sw ver: 3.4.0033 *wella. working na..*