GSM-Forum - View Single Post

welking1991 · 04-09-2010, 09:44

Getting MCU ID
Phone didn't answer with TX line low after UEM reset!
Causes:
1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
2. UEM damaged -> replace uem.

MCU ID: 0xDDDD
Failed! Aborting!
Done!
Phone Restarted...

04-09-2010, 09:44	#1 (permalink)
welking1991 Freak Poster Join Date: Feb 2010 Posts: 261 Member: 1242437 Status: Offline Thanks Meter: 18	1661 need help!!! Getting MCU ID Phone didn't answer with TX line low after UEM reset! Causes: 1. put a 27-33 pico capacitor in connector b/w mbus-gnd. 2. UEM damaged -> replace uem. MCU ID: 0xDDDD Failed! Aborting! Done! Phone Restarted...