[hlakhine]

Phone is start up failed contact the retailer. When flash see this error

Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 138 products, Filtering BB5 Products - wait...
92 Products left after filtering. Ready.
Retrieving Variants for Product RM-504 - wait...
164 Variants Retrieved
Booting CMT...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101051105
CMT_EM_ASIC_ID:        00000296
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        0EE00108C0870052BBA7537CE5A0F3370F33D49D
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    B8C3ADECFC997FCD8081D3DEAF870B8C
CMT_BOOT_ROM_CRC:    4B9B7510
CMT_SECURE_ROM_CRC:    3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Searching for BootCode: DualLine 32Bit
Prepare phone failed with message -> Not found required CMT Algorithm
Failed to Check BB5 Flashing Bus  -> Failed to Boot / Prepare Phone
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Reading Security Block...
Security block OK and saved to "RM-504_358253039883858_4182010_60248 PM.SecurityBlock.PM"
WARNING: "0EE00108C0870052BBA7537CE5A0F3370F33D49D.C0000E70" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101051105
CMT_EM_ASIC_ID:        00000296
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        0EE00108C0870052BBA7537CE5A0F3370F33D49D
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    B8C3ADECFC997FCD8081D3DEAF870B8C
CMT_BOOT_ROM_CRC:    4B9B7510
CMT_SECURE_ROM_CRC:    3E691FF8
CMT Ready!
Prepare phone failed with message -> Not found required CMT Secondary Loader
Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
Booting CMT...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101051105
CMT_EM_ASIC_ID:        00000296
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        0EE00108C0870052BBA7537CE5A0F3370F33D49D
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    B8C3ADECFC997FCD8081D3DEAF870B8C
CMT_BOOT_ROM_CRC:    4B9B7510
CMT_SECURE_ROM_CRC:    3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Searching for BootCode: DualLine 32Bit
Prepare phone failed with message -> Not found required CMT Algorithm
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
RPL backup thread finished, continuing...
Backing up simlock...
MCU Version    V ICPR72_09w36.5
MCU Date    25-09-09
Product        RM-504
Manufacturer    (c) Nokia
IMEI        358253039883858
Mastercode    3733457426
Simlock backup OK, saved to RM-504_358253039883858_4182010_60315 PM.SLBackup.PM
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM-504_20.0.080_prd.core.C00 (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101051105
CMT_EM_ASIC_ID:        00000296
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        0EE00108C0870052BBA7537CE5A0F3370F33D49D
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    B8C3ADECFC997FCD8081D3DEAF870B8C
CMT_BOOT_ROM_CRC:    4B9B7510
CMT_SECURE_ROM_CRC:    3E691FF8
CMT Ready!
RM-504_20.0.080_prd.core.C00, Type: Flash Image, Algo: XSR 1.5, BB5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Searching for BootCode: DualLine 32Bit
Processing Flash Image Failed -> Not found required Algorithm
Failed to Process all Image files -> Failed to process RM-504_20.0.080_prd.core.C00