Quote:
Originally Posted by InfinitySupport  Can you post here flash process operation log ? |
COM10 [VCP0] selected
module v3.41
Device: Huawei-G6600
Checking data, wait...
Action: write flash NAND
write: Firmware
Huawei-G6600_BYD35_09A_PMWY_PCB01_GPRS_MT6235B_S01.E5_2PT 01V01_04_2010-03-22_En_Pt.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
bootloader version: BYD35_09A_PMWY_BOOTLOADER_V005_MT6235B_E5_2PT01V01 _04.bin
nfi area detection finished: Ok
interface: BROM_DLL_v3.1012.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0056]: 0020:003600200036 [ST] ST512R3A
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (115200)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: E5.2PT01V01.04
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: BYD35_09A_PMWY_BOOTLOADER_V005_MT6235B_E5_2PT01V01 _04.bin
nfi area detection finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: BYD35_09A_PMWY_PCB01_GPRS_MT6235B_S01.E5_2PT01V01_ 04.BIN
project-id: E5.2PT01V01.04, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: 2nd [standard] generation
TCL-ID is absent
===> done
nfi area detection...
bootloader version: BYD35_09A_PMWY_BOOTLOADER_V005_MT6235B_E5_2PT01V01 _04.bin
nfi area detection finished: Ok
startup code area #1 check...
startup code area #1 fixed
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
.
.
.
.
.
.
.
.
.
write core...
Disconnect...
done
Finished, time used: 40 min 58 sec
Remove/Install battery now !