[souravhasan]

COM3 [VCP0] selected
module v3.52
Device: I-Mobile-518
Checking data, wait...
Action: write flash NAND
write: Firmware
IMobile-518_DARTS6228_05C_PCB04_GPRS_MT6228_S02.MAUI_05C_W 06_24_MP_V23_En_Cn.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
external bootloader is not present
bootloader version: DARTS6228_05C_BOOTLOADER_V005_MT6228_MAUI_05C_W06_ 24_MP_V23.bin
nfi area detection finished: Ok
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6228:8A02:8A02
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0007]: 00EC:00F100800015 [SAMSUNG] K9F1G08X0M
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00020000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (115200)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: MAUI.05C.W06.24.MP.V23
detect NAND info...
number of areas/bytes to read: 1:00080000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
external bootloader is not present
bootloader version: DARTS6228_05C_BOOTLOADER_V005_MT6228_MAUI_05C_W06_ 24_MP_V23.bin
nfi area detection finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 04
sw version: DARTS6228_05C_PCB04_GPRS_MT6228_S02.MAUI_05C_W06_2 4_MP_V23.BIN
project-id: MAUI.05C.W06.24.MP.V23, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: 2nd [standard] type
TCL-ID is absent
===> done
nfi area detection...
external bootloader is not present
bootloader version: DARTS6228_05C_BOOTLOADER_V005_MT6228_MAUI_05C_W06_ 24_MP_V23.bin
nfi area detection finished: Ok
startup code area #1 check...
error: done
number of cores: 2
loading files...
number of areas: 2
done
write...
error: can not write flash: 0BBF:S_DA_RAM_ERROR
error: last error: 0BBF:S_DA_RAM_ERROR
Disconnect...
done
Finished, time used: 1 min 27 sec
Remove/Install battery now !


how to solved..............