View Single Post
Old 09-15-2010, 05:04   #1 (permalink)
visit999
No Life Poster
 
visit999's Avatar
 
Join Date: Apr 2009
Location: Thailand
Posts: 828
Member: 1013130
Status: Offline
Sonork: 100.1605132
Thanks Meter: 461
8800d dead after flash

8800d rm-165 dead after flash anyone plz tell me what happen ?

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8814(13-06-2010), 1.0.0.14014(13-06-2010)
Processing file: rm16511004.200 as MCU
[TIKU BT2,TIKU ALGORITHM] size: 12.19 MB
Supported Ids: 1052, 2051
ASIC ID: 0x2051 [TikuEdge ver: 2.0]
SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.76.0 revision: 0.7 size: 0x2398
Supported Ids: 1051, 1052, 2051
FlashID0: 00EC 22E8 [Samsung K8S2815ETB,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
FlashID1: 00EC 0030 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: NAND hw: EIJA(E)
FlashID2: 0000 0001 [unused/removed]
FlashID3: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: te_amd.fia [TIKU ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x84D8
Supported Ids: 1051, 1052, 2051
Performing Flash Authentication ...OK
UEM ID: 00262295:173EDA60
Area [00000000-0000FFFF] erased in 0.516 s
Area [00010000-00BFFFFF] erasing ...
Error while erasing 0x00270000-0x0028FFFF, Result: 02000000
flashing terminated !
Flashing terminated with error(s) in 40.828 s
RX Buffer: 0200000000F172


Last edited by visit999; 09-15-2010 at 05:12.
 
 
Page generated in 0.07885 seconds with 7 queries