| No Life Poster
Join Date: Jan 2007 Location: PANGANDARAN BEACH Age: 44
Posts: 525
Member: 427685
Status: Offline Thanks Meter: 103 | soft problem
software version: 1.20
cable type: 1x5 (L5A)
platform: MT: MT62xx (autodetect)
searching adapter at COM3...
adapter found, version: 2000
pins: 5, plain
power cycles: 1
activation cycles: 7
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
19200 fixed
CPU: MT346C
result: Rx:4 Tx:2
time required: 7 sec
Trying to Power-On...
Power On !
software version: 1.20
cable type: 1x5 (L5A)
platform: MT: MT6205, MT6217-MT6235
searching adapter at COM3...
adapter found, version: 2000
pins: 5, plain
power cycles: 1
activation cycles: 7
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
19200 fixed
CPU: MT346C
result: Rx:4 Tx:2
time required: 7 sec
Trying to Power-On...
Power On ! try with free add on from lg box with pinfinder
Selected model is:Generic MT62XX NOR:AUTO
Press Connect to detect memory config...
Starting flasher module.... [BOOT_MODE]
Boot filename: C:\Program Files\Z3X\MTK\JRD_AllInOne_DA.bin
Reconnect battery and press power button now!
Getting MCUID...
Booting... You can release power key now!
Project Name: MT6253_S00
[!] Failed to detect RAM (Possible HW failure)
NOR Detected : N/A
NAND Detected : N/A
Advanced detection information:
BBCHIP: "MT6253_S00", EXT_26M
CODE(0x6253), VER(0x8A02), SW(0x8A00)
NOR_ID: "NOR_UNKNOWN"
NOR_ID: 0x00EC, 0x2404, 0x0000, 0x0000
NAND_ID: "NAND_UNKNOWN"
NAND_ID: 0x0000, 0x0000, 0x0000, 0x0000
Detection Done!
Error: S_DA_NOR_UNSUPPORTED_DEV_ID(3009)
BOOT Analisys failed...
Selected model is:Generic MT62XX NOR:AUTO
Press Connect to detect memory config...
Starting flasher module.... [BOOT_MODE]
Boot filename: C:\Program Files\Z3X\MTK\MTK_AllInOne_DA_new.bin
Reconnect battery and press power button now!
Getting MCUID...
Booting... You can release power key now!
Project Name: MT6253_S00
[!] Failed to detect RAM (Possible HW failure)
NOR Detected : (128Mb+0Kb) Unnamed Flash
NAND Detected : N/A
Advanced detection information:
BBCHIP: "MT6253_S00", EXT_26M
CODE(0x6253), VER(0x8A02), SW(0x8A00)
NOR_ID: "Unnamed Flash"
NOR_ID: 0x00EC, 0x2404, 0x0000, 0x0000
NAND_ID: "NAND_UNKNOWN"
NAND_ID: 0x0000, 0x0000, 0x0000, 0x0000
Detection Done!
Reading NOR : "C:\Program Files\Z3X\MTK\MTKBOOT.TMP", 0x00000000:0x00080000
Operation Done!
Setting NOR buffer size :1000000
PostProcessing Boot File
ROMINFO V7 Structure found!
Ver.:RATECH53_09A_PCB01_GPRS_MT6253_S00.X19_HT_B_S S_MLA_06S0804.BIN_FLNK5N2866ATD_BQ12
Platform:X19_HT_B_SS_MLA_06S0804
Filesystem:00F00000:00100000
This device have no SEC block (Safe for READ/WRITE)
Done!
Starting flasher module.... [READ_MODE]
Reconnect battery and press power button now!
Getting MCUID...
Booting... You can release power key now!
Project Name: MT6253_S00
[!] Failed to detect RAM (Possible HW failure)
NOR Detected : (128Mb+0Kb) Unnamed Flash
NAND Detected : N/A
Advanced detection information:
BBCHIP: "MT6253_S00", EXT_26M
CODE(0x6253), VER(0x8A02), SW(0x8A00)
NOR_ID: "Unnamed Flash"
NOR_ID: 0x00EC, 0x2404, 0x0000, 0x0000
NAND_ID: "NAND_UNKNOWN"
NAND_ID: 0x0000, 0x0000, 0x0000, 0x0000
Detection Done!
Reading NOR : "C:\Documents and Settings\RUBY\My Documents\RATECH53_09A_PCB01_GPRS_MT6253_S00.X19_H T_B_SS_MLA_06S0804.BIN_FLNK5N2866ATD_BQ12", 0x00000000:0x01000000
Operation Done!
Selected model is:Generic MT62XX NOR:AUTO
Press Connect to detect memory config...
Starting flasher module.... [FORMAT_MODE]
Reconnect battery and press power button now!
Reset NVRAM to factory default setting ...
Connected in META Mode.
BaseBand Chip version : MT6253, E02
DSP Firmware ver. : 2000.00.00
Software version : X19_HT_B_SS_MLA_06S0804
Hardware version : RATECH53_09A_HW
Melody version : Melody V0.0
NVM Reset OK.
Operation Done!
Selected model is:Generic MT62XX NOR:AUTO
Press Connect to detect memory config...
Starting flasher module.... [BOOT_MODE]
Boot filename: C:\Program Files\Z3X\MTK\MTK_AllInOne_DA_new.bin
Reconnect battery and press power button now!
Getting MCUID...
Booting... You can release power key now!
Project Name: MT6253_S00
[!] Failed to detect RAM (Possible HW failure)
NOR Detected : (128Mb+0Kb) Unnamed Flash
NAND Detected : N/A
Advanced detection information:
BBCHIP: "MT6253_S00", EXT_26M
CODE(0x6253), VER(0x8A02), SW(0x8A00)
NOR_ID: "Unnamed Flash"
NOR_ID: 0x00EC, 0x2404, 0x0000, 0x0000
NAND_ID: "NAND_UNKNOWN"
NAND_ID: 0x0000, 0x0000, 0x0000, 0x0000
Detection Done!
Reading NOR : "C:\Program Files\Z3X\MTK\MTKBOOT.TMP", 0x00000000:0x00080000
Operation Done!
Setting NOR buffer size :1000000
PostProcessing Boot File
ROMINFO V7 Structure found!
Ver.:RATECH53_09A_PCB01_GPRS_MT6253_S00.X19_HT_B_S S_MLA_06S0804.BIN_FLNK5N2866ATD_BQ12
Platform:X19_HT_B_SS_MLA_06S0804
Filesystem:00F00000:00100000
This device have no SEC block (Safe for READ/WRITE)
Done! thank |