View Single Post
Old 11-28-2010, 00:14   #46 (permalink)
oOXTCOo
No Life Poster
 
oOXTCOo's Avatar
 
Join Date: Dec 2000
Location: J.A.U - Just Another Unlocker
Age: 43
Posts: 3,498
Member: 2878
Status: Offline
Thanks Meter: 9,123
Quote:
Originally Posted by Abzal View Post
[26.11.2010/14:01:53] Searching Phone..
[26.11.2010/14:01:59] Connect Powered OFF Phone witouth Batterie to USB Cable!
[26.11.2010/14:01:59] Searching Phone..OK! Phone detected!
[26.11.2010/14:02:00] =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
[26.11.2010/14:02:00] Booting..
[26.11.2010/14:02:00] Selected Model : GS290 via USB
[26.11.2010/14:02:00] Working.
[26.11.2010/14:02:00] Selected Model : GS290 via USB
[26.11.2010/14:02:00] Working..
[26.11.2010/14:02:01] Selected Model : GS290 via USB
[26.11.2010/14:02:01] Working...
[26.11.2010/14:02:01] Selected Model : GS290 via USB
[26.11.2010/14:02:01] Working....
[26.11.2010/14:02:01] Selected Model : GS290 via USB
[26.11.2010/14:02:01] Working.....
[26.11.2010/14:02:01] Selected Model : GS290 via USB
[26.11.2010/14:02:02] Working......
[26.11.2010/14:02:02] Selected Model : GS290 via USB
[26.11.2010/14:02:03] Working.......
[26.11.2010/14:02:03] Selected Model : GS290 via USB
[26.11.2010/14:02:03] Working........
[26.11.2010/14:02:03] Selected Model : GS290 via USB
[26.11.2010/14:02:03] Working.........
[26.11.2010/14:02:03] Selected Model : GS290 via USB
[26.11.2010/14:02:03] Working..........
[26.11.2010/14:02:05] Selected Model : GS290 via USB
[26.11.2010/14:02:05] Working...........
[26.11.2010/14:02:05] [ERROR] - Unable to read from USB!
if this problem remains after 2nd and 3nd try then you need to start the phone one time fully and then take out batterie and try again...

when i progged this update on some phones while i have tested it, i had same problem... after i started the phone fully and tryed again it worked...
i dont know where is the problem, i think it is not a bug i think its the phone itself, but iam not 100% shure...

just start the phone fully, take batterie out and try again and it will work...
 
 
Page generated in 0.09065 seconds with 7 queries