| Lc m501 cpu: Mt346c problem
COM9 [VCP0] selected
module v3.25
Device: Autodetect 6205-6239 NOR
Checking data, wait...
advanced flash detection enabled
Action: reset settings ("format ffs")
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6253:8A02:8A00]...
CPU: MT6253
high speed boot On
chip: 0000:0000:000F
status: FF
boot packet size: 0400
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 16 sec
Remove/Install battery now !
software version: 1.20
cable type: 1x12 (L12C)
platform: MT: MT6205, MT6217-MT6235
searching adapter at COM9...
adapter found, version: 4000
pins: 12, plain
power cycles: 1
activation cycles: 7
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
19200 fixed
CPU: MT346C
result: Rx:3 Tx:7
time required: 15 sec
Trying to Power-On...
Power On !
Power On !
how to work with this cpu |