GSM-Forum - View Single Post

mobile+plus · 03-24-2011, 07:58

COM105 [VCP0] selected
module v1.78
Device: Huawei-T128-HW-A
Checking data, wait...
Action: "sp-unlock"
1. Make "read flash" operation
2. Make "read eeprom" operation, so you will have backup for emergency case
ATTENTION: save this backup file in safe place and note IMEI for each eeprom backup file !
3. Make "unlock" operation
4. Phone should be unlocked, but imei will be changed
5. Before unlock check that you have an ability to repair imei
Test phone with new imei, is it will be valid for all your networks.
In case of any problems you can write back eeprom backup and original imei will be back.
Do you want to continue ?
direct unlock
Boot ...
Press and HOLD Power button now !
s-gold2: C0
loading...
error: can't run preloader: F0
Release Power button now
Boot Failed
Finished, time used: 6 sec
Remove/Install battery now !

03-24-2011, 07:58	#1 (permalink)
mobile+plus Freak Poster Join Date: Mar 2011 Location: m + koti hyd 95 Posts: 221 Member: 1532828 Status: Offline Thanks Meter: 77	huawei t128 unlocking problam COM105 [VCP0] selected module v1.78 Device: Huawei-T128-HW-A Checking data, wait... Action: "sp-unlock" 1. Make "read flash" operation 2. Make "read eeprom" operation, so you will have backup for emergency case ATTENTION: save this backup file in safe place and note IMEI for each eeprom backup file ! 3. Make "unlock" operation 4. Phone should be unlocked, but imei will be changed 5. Before unlock check that you have an ability to repair imei Test phone with new imei, is it will be valid for all your networks. In case of any problems you can write back eeprom backup and original imei will be back. Do you want to continue ? direct unlock Boot ... Press and HOLD Power button now ! s-gold2: C0 loading... error: can't run preloader: F0 Release Power button now Boot Failed Finished, time used: 6 sec Remove/Install battery now !