View Single Post
Old 04-06-2011, 07:05   #1 (permalink)
..::Gsmideazone::..
No Life Poster
 
..::Gsmideazone::..'s Avatar
 
Join Date: Dec 2008
Location: Apple pocket
Age: 32
Posts: 4,787
Member: 936020
Status: Offline
Sonork: 100.1611462
Thanks Meter: 2,771
Donate money to this user
Nokia Buzzer C2-01, No Ringtones Sound Problem Solution

Nokia Buzzer C2-01, No Ringtones Sound Problem Solution


Another Nokia-c2-01-GsmAngel solution by covering the Buzzer speaker problem, or not ringtones and alert sounds can be heard on the device even the volume knob was already set at high level.


This solution offers among which components need to check to determine and return the phone buzzer function working again. Just refer to it and follow some step by step procedures which we prepared.
Steps to define procedures C2-01 Nokia buzzer speaker problem:
1. Visual inspection of the IHF speaker buzzer for possible alignment of the terminals and / or using a multimeter, replace if found damaged. Clean if it oxidized.
2. Clean the speaker connector PCB contact surfaces.
3. Check / replace the filter capacitors and coils.
4. Trace both positive and negative connecting paths.
5. If the above procedures, won, t solve the problem. PEARL The IC will be the last option to work with his.
Perhaps only reformulates the problem.
__________________
daily visit our forum to gain full gsm support
  Reply With Quote
 
Page generated in 0.06800 seconds with 7 queries