| Secuessfull Flash Nokia X2 In Dead Usb In New Update
MXKEY Serial: C0847186
Library version: 1.0.0.9627(20-04-2011), 1.0.0.16202(20-04-2011)
Processing MCU file: rm618__04.90.mcusw
[BB5,XSR 1.6] size: 26.74 MB
Supported Ids: 2200050920030000, 22000509200C0000
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 1303B4E5
CMT SYSTEM ASIC ID: 000000000000000022000509200C0000 [BCM21351 ver: 1.0]
CMT EM0 ID: 00005361
CMT PUBLIC ID: 201D5E830714DCCDE2D8DCA43751BA8138137542
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
CMT ROM ID: DE56D582BDDE7A3A
Loading CMT secondary boot code
SecondaryBoot: BCM21351_usb2nd.fg [BB5] version: 10.10.0 revision: 2.1 size: 0x3940
Supported Ids: 22000209200C0000, 2200020920030000, 22000509200C0000, 2200050920030000
Secondary boot loaded.
FlashID0: 0020 0030 - 0000 0131 [ST NAND-1G] type: NOR,CMT
FlashID1: 0000 0001 - 0000 0000 [unused/removed] type: NOR,CMT
FlashID2: 0020 0030 - 0000 0131 [ST NAND-1G] type: MuxOneNAND,CMT
Loading CMT update server data
Algorithm: BCM21351_XSR16_usbalg.fg [XSR 1.6] version: 10.6.1 revision: 2.1 size: 0x9942E
Supported Ids: 22000209200C0000, 2200020920030000, 22000509200C0000, 2200050920030000
Update server code loaded.
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 1303B4E5
Verifying communication to device OK.
Reading CMT NPC (0x168 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
NPC_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.4\data\backup\BB5_35269904001526_CE RT.rpl"
CMT PAPUBKEYS HASH: E9700989029D9E899915F781B1582048E042A738
Storing certificate [NPC, CCC, HWC, R&D] OK.
Partitioning....
Partitioning complete
Erase size: 32.88 MB
CMT MuxOneNAND area [00000000-0001FFFF]
CMT MuxOneNAND area [00020000-000203FF]
CMT MuxOneNAND area [00060000-011BFFFF]
CMT MuxOneNAND area [011C0000-01CFFFFF]
CMT MuxOneNAND area [02500000-028FFFFF]
Formating partition ...
Flash programming ...
CMT KEYS block sent
CMT PAPUBKEYS: E9700989029D9E899915F781B1582048E042A738 (RAP Certificate v1 237) sent
CMT PRIMAPP block sent
CMT PASUBTOC block sent
CMT ADA block sent
CMT RAP3NAND block sent
CMT ISA+DYNSW block sent
CMT MCUSW block sent
CMT MCUSW1 block sent
CMT GENIO_INIT block sent
CMT UPDAPP block sent
Programming completed in 9.109 s
Processing PPM file: rm618__04.90.ppm_mk
[BB5,XSR 1.6] size: 6.99 MB
Supported Ids: 2200050920030000, 22000509200C0000
Erase size: 8 MB
CMT MuxOneNAND area [01D00000-024FFFFF]
Flash programming ...
Programming completed in 2.407 s
Processing CNT file: rm618__04.90.image_mk_0595281_004
[BB5,XSR 1.6] size: 18.37 MB
Supported Ids: 2200050920030000, 22000509200C0000
Erase size: 76.31 MB
CMT MuxOneNAND area [02900000-0753FFFF]
Formating partition ...
Flash programming ...
Programming completed in 6.297 s
Total time for flashing process(boot+erase+write) was 30.734 s
Waiting for device boot up ...
Device found: nmwcdc\Nokia X2-00 USB Phonet, PORT_ID: 1B550893
Verifying communication to device OK.
Phone Type: RM-618 (Nokia X2-00)
SW Version: V 04.90 28-09-10 RM-618 (c) Nokia
Imei plain: 35269904001526-8
Product Code: 0595304
Battery voltage: 3800 mV, current: 1 mA
Language Pack:
- not available.
This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed
Imei net: 352699040015268
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 1.000 s
|