Code:
COM16 [VCP0] selected
module v3.30
Device: Autodetect 6253 NOR
Checking data, wait...
Action: write flash
write: Firmware
BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_62__firmware_20110319-173836.B4M.bin
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_62__ffs_20110319-175413.B4M.bin
No licensed to produce fix...
warning: firmware do not have this kind of fault
nor area detection...
"format ffs" active
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
detect sec ro...
detect custom parameters...
detect project-id...
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
warning: header is empty: probably flash chip completely erased
warning: can not detect header
nfi area detection (0 cores) finished: failed
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
code offset: 00000000
===> done
startup code area #1 check...
rpl file not found: C:\InfinityBox\ChineseMiracle\id.00006235.[BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_62.BIN_4D61385C].rpl
rpl file not found: C:\InfinityBox\ChineseMiracle\id.00006235._BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_62.BIN_4D61385C_.rpl
rpl file not found: C:\InfinityBox\ChineseMiracle\backup_security\id.00006235.[BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_62.BIN_4D61385C].rpl
rpl file not found: C:\InfinityBox\ChineseMiracle\backup_security\id.00006235._BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_62.BIN_4D61385C_.rpl
====================
warning: unknown firmware: BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_62.BIN_4D61385C
Unknown firmware found (v.3.30, database date: 17.04.2011), user action required:
1. download latest software from support area and try again
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_62.BIN
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
====================
error: startup code area #1 can't be fixed
You can flash phone now but can not finalize it,
in most cases phone CAN NOT power-on.
Do you want to continue anyway ?
number of cores: 2
loading files...
number of areas: 2
done
write...
error: can not write flash (0): 0C3A:S_DA_NFB_TARGET_IS_SINGLE_BL_BUT_PC_NOT
error: last error: 0C3A:S_DA_NFB_TARGET_IS_SINGLE_BL_BUT_PC_NOT
Disconnect...
done
Finished, time used: 1 min 12 sec
Remove/Install battery now !