[Steamroller]

so far I try to flash it several times including flash with ENO file or USB flashing with cyclone and mxkey

phone was v30.0.3 when it came to me but I can't find sw with same product code v30.0.0 or 31.0.4 so I reflash it with 30.0.3 , same problem . Then I try 31.0.4 , nothnig new...

then ENO , nothing new
then USB , nothnig new

Checked BSI - is OK
Checked + Lines - all ok
Try other batteryes - nothnig new
Checked current consumption when power up - seems to be the same as a good working set

PCB is looking good , no wather damage , no torsion , set looks as new...

try to remove camera like some peoples say on this forum - still only vibrate
try other LCD like some peoples say on this forum - still only vibrate
try to power up only with lcd connected - still only vibrate

the set is able to enter TEST or LOCAL mode only with box , flash seems to be ok , no error

the set won't power up when charger is inserted

at power up it vibrate BUT it won't vibrate if i try power up again untill I remove and reinsert battery ! (I tryed with a good one to isolate BSI and it vibrate every time I press power on so I eliminate BSI problem like that)

now... if someone has an answer to this problem is welcome to help !

here is the log : first one is info and shows actual status of the phone
and second is more complete and shows initial status , flashing logs more status etc