30 May 2011: "MModule" v3.92:
.MTS-Basic, MTS-140, Alcatel-140 models supported
.LG-S310 model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.LG-A155 model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.MessagePhone-QS150 model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.Huawei-G6600 new hardware type (128Mb flash chip) under test
.Philips-X518 model included in list (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.Fly-DS165 model included in list (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.Karbonn-K496 model included in list (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.Micromax-X505 model included in list (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.firmware database updated
.Huawei-G6600 new hardware type (128Mb flash chip) under test
WORLD FIRST HUAWEI-G6600 NEW HARDWARE 128MB CHIP UNLOCKING
ALL THANS GOES TO dawood1208 FOR TEST
ORIGINAL POST
http://forum.gsmhosting.com/vbb/7377944-post10.html Code:
COM134 [VCP0] selected
module v3.92
Action: "sp-unlock"
unlock method: smart fast
Model: Huawei-G6600_128mb
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6235:8A04:8A01]...
CPU: MT6235
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6235,E04
Date: 2000.00.00
Version: 1.0
Version: E5.2PT02V01.04
Version: BYD35_09A_HW
88 byte(s) read
imei:
connection Ok
195 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
183 byte(s) read
reading data...
reading data #2...
188 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 17 sec
Remove/Install battery now !